Cantek ST152C Single End Tenoner
Drop Ship Item
This item ships directly from the vendor. Additional freight charges may apply.
This item may incur additional shipping costs and lead times.
Product Details
- 5 heads
- CSA Telemecanique switches
Top & Bottom Tenon Heads
- Carbide insert spiral tenon heads
- 1 ¼” dia. spindle
- 6″ long x 5″ thick tenons heads. Spiral with carbide insert tooling
- 2 x 5HP motors
- 3400 RPM
- 14 mm square carbide tips on end of cutterheads to produce clean cut shoulder
- 1″ lateral adjustment of tenon heads
2XCope Spindle Vertical Top&Bottom
- 1 ¼” dia. spindle, 6000 RPM
- 5HP motor to each cope head
- Max. dia. tooling 6-3/8″
- 2-3/4″ length of spindle
- Independent adjustment each head
- 2 x 4 knife wedge type cutterheads included
- Counterbore locknut allows both heads to move close together
Cut Off Saw
- 12″ dia. driven from tenon heads
- 1 ¼” shaft dia. x 6″ long
- 2800 RPM
- Saw position moved by changing spacers
Sliding Table Carriage
- Pneumatic holddown clamp for clamping work pieces onto traveling table
- Table size 50″ long x 17″ wide
Options Included
- Set of Heads
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Downloads
Specifications
| Box Quantity | 1 |
| Product Type | Single End Tenoner |
| Power | 230V |
| Frequency | |
| Capacity | |
| Finish | |
| Drum Speed | |
| Blade Diameter | |
| Tank Storage | |
| Speed | |
| Maximum Cutting Length | |
| Maximum Width | |
| Motor Power | |
| Maximum Pressure | |
| Pump Up Time | |
| Arbor Diameter | |
| Arbor | |
| Width | 72-7/16" |
| Height | 45-9/32" |
| Drive Motor | |
| Belt Size | |
| Depth | |
| Motor Phase | |
| Horsepower | 7.5 HP |
| Phase | 2 |
| Range of Speeds | 3400 RPM |
| Length | 66-9/64" |
| Voltage | |
| Backing Material | |
| Material | |
| Recovery Time |
Drop Ship Item
This item ships directly from the vendor. Additional freight charges may apply.
This item may incur additional shipping costs and lead times.
Product Details
- 5 heads
- CSA Telemecanique switches
Top & Bottom Tenon Heads
- Carbide insert spiral tenon heads
- 1 ¼” dia. spindle
- 6″ long x 5″ thick tenons heads. Spiral with carbide insert tooling
- 2 x 5HP motors
- 3400 RPM
- 14 mm square carbide tips on end of cutterheads to produce clean cut shoulder
- 1″ lateral adjustment of tenon heads
2XCope Spindle Vertical Top&Bottom
- 1 ¼” dia. spindle, 6000 RPM
- 5HP motor to each cope head
- Max. dia. tooling 6-3/8″
- 2-3/4″ length of spindle
- Independent adjustment each head
- 2 x 4 knife wedge type cutterheads included
- Counterbore locknut allows both heads to move close together
Cut Off Saw
- 12″ dia. driven from tenon heads
- 1 ¼” shaft dia. x 6″ long
- 2800 RPM
- Saw position moved by changing spacers
Sliding Table Carriage
- Pneumatic holddown clamp for clamping work pieces onto traveling table
- Table size 50″ long x 17″ wide
Options Included
- Set of Heads
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Downloads
Specifications
| Box Quantity | 1 |
| Product Type | Single End Tenoner |
| Power | 230V |
| Frequency | |
| Capacity | |
| Finish | |
| Drum Speed | |
| Blade Diameter | |
| Tank Storage | |
| Speed | |
| Maximum Cutting Length | |
| Maximum Width | |
| Motor Power | |
| Maximum Pressure | |
| Pump Up Time | |
| Arbor Diameter | |
| Arbor | |
| Width | 72-7/16" |
| Height | 45-9/32" |
| Drive Motor | |
| Belt Size | |
| Depth | |
| Motor Phase | |
| Horsepower | 7.5 HP |
| Phase | 2 |
| Range of Speeds | 3400 RPM |
| Length | 66-9/64" |
| Voltage | |
| Backing Material | |
| Material | |
| Recovery Time |