Cantek P630HV 24" Single Surface Planer 10HP Three Phase
Item # CANP630HV
•Mfr # CANP630HV-230-3
$18000.00
/Each
Freight: $995.00
This item may incur additional shipping costs and lead times.
Product Details
- PLC digital control for auto-thickness setting
- Sectional infeed roller and sectional chip breaker
- Variable speed drive
- Quick-set table roll adjustment
- Steel spiral cutterhead with carbide inserts – 6 rows 86 inserts 30 x 12 x 1.5 mm
- Cutters mounted on angle for ‘shear’ cut
- Exhaust hood with 6″ outlet
- Magnetic controls
- Additional mechanical digital readout for fine thickness setting
- 2 Idle rollers in table 2-7/8″ dia.
- 4 table jack screws
- 3.86″ diameter cutterhead
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Box Quantity | 1 |
| Cutter Head Diameter | 3.86" |
| Motor Voltage | |
| Height | |
| Power | |
| Horsepower | 10HP |
| Phase | 3 |
| Length | 51" |
| Drive Motor | |
| Voltage | |
| Width | 24-3/4" |
| Cutter Head Type | Spiral |
| Motor Phase | |
| Product Type | Planer |
| Cutting Width | |
| Infeed Roller Diameter (In.) | |
| Cutter Block Diameter | |
| Speed | |
| Recommended Circuit Size (Amps.) | |
| Maximum Depth of Cut (In.) | |
| Number of Rollers | |
| Maximum Planing Width (In.) | |
| Motor Voltage (V.) | |
| Column Diameter (In.) | |
| Cuts Per Minute | |
| Reversible | |
| Maximum Full Width Depth of Cut (In.) | |
| Motor Current (Amps) | |
| Movement - Horizontal (In.) | |
| Wiring Remarks | |
| Prewired Voltage (V.) | |
| Feed Rate | |
| Table Height from Floor (In.) | |
| Outfeed Table Length (In.) | |
| Table Size (L x W) (In.) | |
| Dust Collection Minimum CFM Required (CFM) | |
| Distance Between Rollers - Center to Center (In.) | |
| Number of Speeds | |
| Knife Size (L x W x T) | |
| Table Size with Extensions (L x W) (In.) | |
| Number of Knives | |
| Segmented Infeed Roller Diameter (In.) | |
| Maximum Height of Rollers Parallel to Tabletop (In.) | |
| Bed Rollers Adjustable from Front | |
| Digital Readout | |
| Type of Cutterhead | |
| Style (Type) | |
| Range of Speeds | |
| Outfeed Roller Diameter (In.) | |
| Maximum Planing Thickness (In.) | |
| Table Support | |
| Motor Power | 10HP |
| Movement - Vertical (In.) | |
| Minimum Planing Length (In.) | |
| Cutter Block Speed | |
| Dust Port Outside Diameter (In.) | |
| Warranty | |
| Planing Height | |
| Planing Width | |
| Chip Removal | |
| Extraction Connection |
Item # CANP630HV
•Mfr # CANP630HV-230-3
$18000.00
/Each
Freight: $995.00
This item may incur additional shipping costs and lead times.
Product Details
- PLC digital control for auto-thickness setting
- Sectional infeed roller and sectional chip breaker
- Variable speed drive
- Quick-set table roll adjustment
- Steel spiral cutterhead with carbide inserts – 6 rows 86 inserts 30 x 12 x 1.5 mm
- Cutters mounted on angle for ‘shear’ cut
- Exhaust hood with 6″ outlet
- Magnetic controls
- Additional mechanical digital readout for fine thickness setting
- 2 Idle rollers in table 2-7/8″ dia.
- 4 table jack screws
- 3.86″ diameter cutterhead
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Box Quantity | 1 |
| Cutter Head Diameter | 3.86" |
| Motor Voltage | |
| Height | |
| Power | |
| Horsepower | 10HP |
| Phase | 3 |
| Length | 51" |
| Drive Motor | |
| Voltage | |
| Width | 24-3/4" |
| Cutter Head Type | Spiral |
| Motor Phase | |
| Product Type | Planer |
| Cutting Width | |
| Infeed Roller Diameter (In.) | |
| Cutter Block Diameter | |
| Speed | |
| Recommended Circuit Size (Amps.) | |
| Maximum Depth of Cut (In.) | |
| Number of Rollers | |
| Maximum Planing Width (In.) | |
| Motor Voltage (V.) | |
| Column Diameter (In.) | |
| Cuts Per Minute | |
| Reversible | |
| Maximum Full Width Depth of Cut (In.) | |
| Motor Current (Amps) | |
| Movement - Horizontal (In.) | |
| Wiring Remarks | |
| Prewired Voltage (V.) | |
| Feed Rate | |
| Table Height from Floor (In.) | |
| Outfeed Table Length (In.) | |
| Table Size (L x W) (In.) | |
| Dust Collection Minimum CFM Required (CFM) | |
| Distance Between Rollers - Center to Center (In.) | |
| Number of Speeds | |
| Knife Size (L x W x T) | |
| Table Size with Extensions (L x W) (In.) | |
| Number of Knives | |
| Segmented Infeed Roller Diameter (In.) | |
| Maximum Height of Rollers Parallel to Tabletop (In.) | |
| Bed Rollers Adjustable from Front | |
| Digital Readout | |
| Type of Cutterhead | |
| Style (Type) | |
| Range of Speeds | |
| Outfeed Roller Diameter (In.) | |
| Maximum Planing Thickness (In.) | |
| Table Support | |
| Motor Power | 10HP |
| Movement - Vertical (In.) | |
| Minimum Planing Length (In.) | |
| Cutter Block Speed | |
| Dust Port Outside Diameter (In.) | |
| Warranty | |
| Planing Height | |
| Planing Width | |
| Chip Removal | |
| Extraction Connection |