Cantek P305 10' Sliding Table Saw 5HP Three Phase
Item # CANP3053
•Mfr # CANP305-230-3
$10700.00
/Each
Freight: $1,395.00
Min Order: 1
Qty mult. by: 1
This item may incur additional shipping costs and lead times.
Product Details
- 5 HP main motor with 1HP scoring motor
- 10′ precision anodized aluminum sliding table travels on ball bearings which run on hardened steel guide strips
- 14″ maximum main blade diameter
- Solid cast iron main table which is precision ground
- Solid rip fence runs on precision round cylindrical guide and is equipped with manual fine adjustment and locking lever
- 51″ rip capacity
- Optional overhead saw blade guard included (CE-type) with built in dust port
- Manual blade rise / fall& tilting with blade angle indicator
- Convenient manual scoring adjustment
- Eccentric hold down clamp & wedge for solid wood ripping included
- Extendable outrigger arm supports crosscut fence assembly
- Aluminum extruded crosscut fence with two flip stops with dual metric and inch rulers
- Available in 3-phase and 1-phase electrics
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Box Quantity | 1 |
| Product Type | Sliding Table Saw |
| Maximum Cutting Length | |
| Table Height | |
| Height | |
| Width | |
| Number of Teeth | |
| Length | |
| Horsepower | 5HP |
| Voltage | 230V |
| Blade Diameter | 14" |
| Arbor | |
| Phase | 3 |
| Maximum Tilt | |
| Table Size (In.) | |
| Table Height from Floor (In.) | |
| Style | |
| Distance Between Sliding Table and Blade (In.) | |
| Prewired Voltage (V.) | |
| Maximum Diameter of Dado (In.) | |
| Speed | |
| Maximum Rip Left of Blade (In.) | |
| Maximum Width of Dado (In.) | |
| Motor Power | |
| Saw Blade Diameter | |
| Table Type | |
| Maximum Rip Right of Blade (In.) | |
| Motor Voltage (V.) | |
| Dust Port Outside Diameter (In.) | |
| Miter Gauge Type | |
| Table Size with Full Extensions (In.) | |
| Table T-Slot (In.) | |
| Motor Phase | |
| Arbor Diameter (In.) | |
| Recommended Circuit Size (Amps.) | |
| Dust Collection Minimum CFM Required (CFM) | |
| Motor Current (Amps) | |
| Table Size with Extensions (In.) | |
| Maximum Depth of Cut at 90 Degrees (In.) | |
| Maximum Depth of Cut at 45 Degrees (In.) | |
| Table in Front of Saw Blade at Maximum Depth of Cut (In.) | |
| Warranty | |
| Cutting Height | |
| Main Saw Blade Change | |
| Saw Blade Thickness | |
| Cutting Width | |
| Sliding Table Length | |
| Control | |
| Display Resolution | |
| Control Panel | |
| Cutting angle/height | |
| Cutting Width Control | |
| Extraction Connection | |
| Saw Blade Tilting Range |
Item # CANP3053
•Mfr # CANP305-230-3
$10700.00
/Each
Freight: $1,395.00
Min Order: 1
Qty mult. by: 1
This item may incur additional shipping costs and lead times.
Product Details
- 5 HP main motor with 1HP scoring motor
- 10′ precision anodized aluminum sliding table travels on ball bearings which run on hardened steel guide strips
- 14″ maximum main blade diameter
- Solid cast iron main table which is precision ground
- Solid rip fence runs on precision round cylindrical guide and is equipped with manual fine adjustment and locking lever
- 51″ rip capacity
- Optional overhead saw blade guard included (CE-type) with built in dust port
- Manual blade rise / fall& tilting with blade angle indicator
- Convenient manual scoring adjustment
- Eccentric hold down clamp & wedge for solid wood ripping included
- Extendable outrigger arm supports crosscut fence assembly
- Aluminum extruded crosscut fence with two flip stops with dual metric and inch rulers
- Available in 3-phase and 1-phase electrics
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Box Quantity | 1 |
| Product Type | Sliding Table Saw |
| Maximum Cutting Length | |
| Table Height | |
| Height | |
| Width | |
| Number of Teeth | |
| Length | |
| Horsepower | 5HP |
| Voltage | 230V |
| Blade Diameter | 14" |
| Arbor | |
| Phase | 3 |
| Maximum Tilt | |
| Table Size (In.) | |
| Table Height from Floor (In.) | |
| Style | |
| Distance Between Sliding Table and Blade (In.) | |
| Prewired Voltage (V.) | |
| Maximum Diameter of Dado (In.) | |
| Speed | |
| Maximum Rip Left of Blade (In.) | |
| Maximum Width of Dado (In.) | |
| Motor Power | |
| Saw Blade Diameter | |
| Table Type | |
| Maximum Rip Right of Blade (In.) | |
| Motor Voltage (V.) | |
| Dust Port Outside Diameter (In.) | |
| Miter Gauge Type | |
| Table Size with Full Extensions (In.) | |
| Table T-Slot (In.) | |
| Motor Phase | |
| Arbor Diameter (In.) | |
| Recommended Circuit Size (Amps.) | |
| Dust Collection Minimum CFM Required (CFM) | |
| Motor Current (Amps) | |
| Table Size with Extensions (In.) | |
| Maximum Depth of Cut at 90 Degrees (In.) | |
| Maximum Depth of Cut at 45 Degrees (In.) | |
| Table in Front of Saw Blade at Maximum Depth of Cut (In.) | |
| Warranty | |
| Cutting Height | |
| Main Saw Blade Change | |
| Saw Blade Thickness | |
| Cutting Width | |
| Sliding Table Length | |
| Control | |
| Display Resolution | |
| Control Panel | |
| Cutting angle/height | |
| Cutting Width Control | |
| Extraction Connection | |
| Saw Blade Tilting Range |