1/2" x 4-1/8" Opposite-Shear Staggertooth Bit, 2-Flute, 1/2" Shank
Item # AN51324
•Mfr # 51324
$47.37
/Each
Product Details
A stagger-tooth bit has two cutting edges, each only half the flute length, located 180-? apart, one high, one low. The result is a tool that combines the speed and chip clearance of a one-flute bit with the strength and balance of a two-flute bit. This "opposite-shear"O configuration features a down-shear edge and an up-shear edge. On a through-cut, it shears down on both surfaces at the same time. It is excellent for working double-sided melamine, plywood, laminates, and veneers, as well as solid-surface materials.
Features:
? Double flute
? Staggered shear tooth design
? Unique design for plunge and route operations and trimming of double-sided melamine
? Particularly suitable for sink cutouts
? Also works well for solid surface materials
Features:
? Double flute
? Staggered shear tooth design
? Unique design for plunge and route operations and trimming of double-sided melamine
? Particularly suitable for sink cutouts
? Also works well for solid surface materials
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Height | |
| Width | |
| Cutting Diameter | 1/2" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Staggertooth Bit |
| Length | 4-1/8" |
| Degree of Cut | |
| Shank Diameter | 1/2" |
Item # AN51324
•Mfr # 51324
$47.37
/Each
Product Details
A stagger-tooth bit has two cutting edges, each only half the flute length, located 180-? apart, one high, one low. The result is a tool that combines the speed and chip clearance of a one-flute bit with the strength and balance of a two-flute bit. This "opposite-shear"O configuration features a down-shear edge and an up-shear edge. On a through-cut, it shears down on both surfaces at the same time. It is excellent for working double-sided melamine, plywood, laminates, and veneers, as well as solid-surface materials.
Features:
? Double flute
? Staggered shear tooth design
? Unique design for plunge and route operations and trimming of double-sided melamine
? Particularly suitable for sink cutouts
? Also works well for solid surface materials
Features:
? Double flute
? Staggered shear tooth design
? Unique design for plunge and route operations and trimming of double-sided melamine
? Particularly suitable for sink cutouts
? Also works well for solid surface materials
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Height | |
| Width | |
| Cutting Diameter | 1/2" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Staggertooth Bit |
| Length | 4-1/8" |
| Degree of Cut | |
| Shank Diameter | 1/2" |