1-5/8" x 3-5/16" Ogee 2-Piece Stile and Rail Set, 2-Wing, 1/2" Shank
Item # AN55430
•Mfr # 55430
$155.10
/Each
Min Order: 1
Quantity Multiple by: 1
Product Details
These sets include two trim cutters for stock 7/8" through 1" in thickness. (These trim cutters can be removed for making bearing-guided cuts on stock under 7/8" thick.)
Use in a table-mounted router. Guide straight cuts with the fence, setting it tangent to the trim cutters. Use the pilot bearing only for cuts on curved rails or stiles; for cuts on curved parts 7/8" to 1" thick, a template must to used.
Features:
2-Wing
With ball bearing guide
Use in a table-mounted router. Guide straight cuts with the fence, setting it tangent to the trim cutters. Use the pilot bearing only for cuts on curved rails or stiles; for cuts on curved parts 7/8" to 1" thick, a template must to used.
Features:
2-Wing
With ball bearing guide
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
Height | |
Width | |
Cutting Diameter | 1-5/8" |
Application | |
Material | Carbide Tipped |
Product Type | Stile and Rail Set |
Length | 3-5/16" |
Degree of Cut | |
Shank Diameter | 1/2" |
Item # AN55430
•Mfr # 55430
$155.10
/Each
Min Order: 1
Quantity Multiple by: 1
Product Details
These sets include two trim cutters for stock 7/8" through 1" in thickness. (These trim cutters can be removed for making bearing-guided cuts on stock under 7/8" thick.)
Use in a table-mounted router. Guide straight cuts with the fence, setting it tangent to the trim cutters. Use the pilot bearing only for cuts on curved rails or stiles; for cuts on curved parts 7/8" to 1" thick, a template must to used.
Features:
2-Wing
With ball bearing guide
Use in a table-mounted router. Guide straight cuts with the fence, setting it tangent to the trim cutters. Use the pilot bearing only for cuts on curved rails or stiles; for cuts on curved parts 7/8" to 1" thick, a template must to used.
Features:
2-Wing
With ball bearing guide
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
Height | |
Width | |
Cutting Diameter | 1-5/8" |
Application | |
Material | Carbide Tipped |
Product Type | Stile and Rail Set |
Length | 3-5/16" |
Degree of Cut | |
Shank Diameter | 1/2" |