3/4" x 3" SuperTrim Down-Shear Flush Trim Bit, 2-Flute, 1/2" Shank
Item # AN47135
•Mfr # 47135
$43.66
/Each
Min Order: 1
Qty mult. by: 1
Product Details
For exceptional cutting speed, coupled with a super-fine finish, use these large-diameter flush trim bits on a standard router. Available in either up-shear or down-shear. Especially suitable for solid surface material when used with optional #47709 Delrinr bearing. Furnished with steel bearing #47714.
Features:
• 200% longer life time even when working with abrasive materials
• Superior geometric design
• Advanced grinding technology that improves the carbides' resistance to wear
• Super clean cuts
• 1" of cutting height
Note: Down-shear bits are not intended for router table use.
Features:
• 200% longer life time even when working with abrasive materials
• Superior geometric design
• Advanced grinding technology that improves the carbides' resistance to wear
• Super clean cuts
• 1" of cutting height
Note: Down-shear bits are not intended for router table use.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 3/4" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Flush Trim Bit |
| Length | 3" |
| Degree of Cut | 5° |
| Shank Diameter | 1/2" |
Item # AN47135
•Mfr # 47135
$43.66
/Each
Min Order: 1
Qty mult. by: 1
Product Details
For exceptional cutting speed, coupled with a super-fine finish, use these large-diameter flush trim bits on a standard router. Available in either up-shear or down-shear. Especially suitable for solid surface material when used with optional #47709 Delrinr bearing. Furnished with steel bearing #47714.
Features:
• 200% longer life time even when working with abrasive materials
• Superior geometric design
• Advanced grinding technology that improves the carbides' resistance to wear
• Super clean cuts
• 1" of cutting height
Note: Down-shear bits are not intended for router table use.
Features:
• 200% longer life time even when working with abrasive materials
• Superior geometric design
• Advanced grinding technology that improves the carbides' resistance to wear
• Super clean cuts
• 1" of cutting height
Note: Down-shear bits are not intended for router table use.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 3/4" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Flush Trim Bit |
| Length | 3" |
| Degree of Cut | 5° |
| Shank Diameter | 1/2" |