3/4" x 2-5/8" Laminate Trimmer Router Bit with Euro Square Bearing, 2-Flute, 1/2" Shank
Item # AN47149
•Mfr # 47149
$35.97
/Each
Backordered
Min Order: 1
Qty mult. by: 1
Product Details
Amana Tool industrial quality carbide tipped laminate trim bits with the Euro Square Bearings. The bits are designed according to specifications with a slight taper allowing for adjustment up or down on the work edge to finish off the edge with a smooth and burr free cut. The square bearing is manufactured with a strong non-stick Teflon which won't mark your edge so it can be wiped clean easily.
Features:
• Leaves no marks on high-gloss, finished edges
• Use 1/2" diameter bit with laminate trimmers
• Glue won't stick to bearing
• Beveled cutter means little or no hand filing
• Will not scratch high gloss laminates
• Beveled cutter can be resharpened
• 5/8" of cutting height
Features:
• Leaves no marks on high-gloss, finished edges
• Use 1/2" diameter bit with laminate trimmers
• Glue won't stick to bearing
• Beveled cutter means little or no hand filing
• Will not scratch high gloss laminates
• Beveled cutter can be resharpened
• 5/8" of cutting height
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
Item # AN47149
•Mfr # 47149
$35.97
/Each
Backordered
Min Order: 1
Qty mult. by: 1
Product Details
Amana Tool industrial quality carbide tipped laminate trim bits with the Euro Square Bearings. The bits are designed according to specifications with a slight taper allowing for adjustment up or down on the work edge to finish off the edge with a smooth and burr free cut. The square bearing is manufactured with a strong non-stick Teflon which won't mark your edge so it can be wiped clean easily.
Features:
• Leaves no marks on high-gloss, finished edges
• Use 1/2" diameter bit with laminate trimmers
• Glue won't stick to bearing
• Beveled cutter means little or no hand filing
• Will not scratch high gloss laminates
• Beveled cutter can be resharpened
• 5/8" of cutting height
Features:
• Leaves no marks on high-gloss, finished edges
• Use 1/2" diameter bit with laminate trimmers
• Glue won't stick to bearing
• Beveled cutter means little or no hand filing
• Will not scratch high gloss laminates
• Beveled cutter can be resharpened
• 5/8" of cutting height
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |