1-3/4" x 2-13/16" Chamfer Bit with Ball Bearing, 4-Flute, 1/2" Shank
Item # AN47309
•Mfr # 47309
$106.51
/Each
Min Order: 1
Qty mult. by: 1
Product Details
Chamfer or bevel edges for decorative effect or to form edge miter joints. Produce crisp, uniform edges at accurate angles to make 4-, 6-, 8-, 12-, or 16-sided boxes. For best results use in a router table. 3/4" of cutting height
Excellent for cutting:
• Acrylic
• Laminate
• MDF/HDF
• Melamine
• Wood
• Plywood
Excellent for cutting:
• Acrylic
• Laminate
• MDF/HDF
• Melamine
• Wood
• Plywood
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 1-3/4" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Chamfer Bit |
| Length | 2-13/16" |
| Degree of Cut | 45° |
| Shank Diameter | 1/2" |
Item # AN47309
•Mfr # 47309
$106.51
/Each
Min Order: 1
Qty mult. by: 1
Product Details
Chamfer or bevel edges for decorative effect or to form edge miter joints. Produce crisp, uniform edges at accurate angles to make 4-, 6-, 8-, 12-, or 16-sided boxes. For best results use in a router table. 3/4" of cutting height
Excellent for cutting:
• Acrylic
• Laminate
• MDF/HDF
• Melamine
• Wood
• Plywood
Excellent for cutting:
• Acrylic
• Laminate
• MDF/HDF
• Melamine
• Wood
• Plywood
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 1-3/4" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Chamfer Bit |
| Length | 2-13/16" |
| Degree of Cut | 45° |
| Shank Diameter | 1/2" |