2" x 3/4" Radius Plunging Round Over Bit, 2-Flute, 1/2" Shank
Item # AN49710
•Mfr # 49710
Min Order: 1
Qty mult. by: 1
Product Details
This bit creates a flat-bottom groove between two quarter-round shapes. Short vertical walls extending below the radius lend extra depth to the appearance. Depending upon the cut depth adjustment, the radii can be flush with the work surface or recessed. The profile can be formed on an edge using an edge guide or, on the router table using a fence. Maximum RPM 14,000.
Use in a table-mounted router. Not for use in a handheld router!
Use in a table-mounted router. Not for use in a handheld router!
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 2" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Plunging Round Over Bit |
| Length | 2-29/32" |
| Degree of Cut | |
| Shank Diameter | 1/2" |
Item # AN49710
•Mfr # 49710
Min Order: 1
Qty mult. by: 1
Product Details
This bit creates a flat-bottom groove between two quarter-round shapes. Short vertical walls extending below the radius lend extra depth to the appearance. Depending upon the cut depth adjustment, the radii can be flush with the work surface or recessed. The profile can be formed on an edge using an edge guide or, on the router table using a fence. Maximum RPM 14,000.
Use in a table-mounted router. Not for use in a handheld router!
Use in a table-mounted router. Not for use in a handheld router!
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 2" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Plunging Round Over Bit |
| Length | 2-29/32" |
| Degree of Cut | |
| Shank Diameter | 1/2" |