3/16" x 2" Aluminum Cutting ZrN Coated Up-Cut End Mill Bit, 1-Flute, 1/4" Shank
Item # AN51620
•Mfr # 51620
$61.15
/Each
Min Order: 1
Qty mult. by: 1
Product Details
Designed to route a finished appearance into aluminum, brass, copper and non-ferrous metals in one pass, these Amana Tool end mills utilize the 'O' flute up-cut design for a super-clean finish. By combining the up-cut design along with the common 3/32" convex radius, you can maximize your efficiency by routing one single pass. 3/64" of radius. 3/32" of cutting height.
Excellent for Cutting:
• Aluminum
• Aluminum 5052
• Brass
• Copper
• Fomex with Aluminum Face
• Gold
• Non-Ferrous Metals
• Silver
• Acrylonitrile-Butadiene-Styrene (ABS)
• Lexan
The Zirconium Nitride (ZrN) coating creates a harder and tougher cutting ceramic over carbide edge allowing for a prolonged cutting edge life and helps to prevent the build-up/galling of material in the flutes while cutting.
Amana's combination end mill/router bits offer the flexibility to cut the radius along with the proven performance of the up-cut design for superior chip ejection.
Excellent for Cutting:
• Aluminum
• Aluminum 5052
• Brass
• Copper
• Fomex with Aluminum Face
• Gold
• Non-Ferrous Metals
• Silver
• Acrylonitrile-Butadiene-Styrene (ABS)
• Lexan
The Zirconium Nitride (ZrN) coating creates a harder and tougher cutting ceramic over carbide edge allowing for a prolonged cutting edge life and helps to prevent the build-up/galling of material in the flutes while cutting.
Amana's combination end mill/router bits offer the flexibility to cut the radius along with the proven performance of the up-cut design for superior chip ejection.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 3/16" |
| Application | |
| Material | Solid Carbide |
| Product Type | End Mill Bit |
| Length | 2" |
| Degree of Cut | |
| Shank Diameter | 1/4" |
Item # AN51620
•Mfr # 51620
$61.15
/Each
Min Order: 1
Qty mult. by: 1
Product Details
Designed to route a finished appearance into aluminum, brass, copper and non-ferrous metals in one pass, these Amana Tool end mills utilize the 'O' flute up-cut design for a super-clean finish. By combining the up-cut design along with the common 3/32" convex radius, you can maximize your efficiency by routing one single pass. 3/64" of radius. 3/32" of cutting height.
Excellent for Cutting:
• Aluminum
• Aluminum 5052
• Brass
• Copper
• Fomex with Aluminum Face
• Gold
• Non-Ferrous Metals
• Silver
• Acrylonitrile-Butadiene-Styrene (ABS)
• Lexan
The Zirconium Nitride (ZrN) coating creates a harder and tougher cutting ceramic over carbide edge allowing for a prolonged cutting edge life and helps to prevent the build-up/galling of material in the flutes while cutting.
Amana's combination end mill/router bits offer the flexibility to cut the radius along with the proven performance of the up-cut design for superior chip ejection.
Excellent for Cutting:
• Aluminum
• Aluminum 5052
• Brass
• Copper
• Fomex with Aluminum Face
• Gold
• Non-Ferrous Metals
• Silver
• Acrylonitrile-Butadiene-Styrene (ABS)
• Lexan
The Zirconium Nitride (ZrN) coating creates a harder and tougher cutting ceramic over carbide edge allowing for a prolonged cutting edge life and helps to prevent the build-up/galling of material in the flutes while cutting.
Amana's combination end mill/router bits offer the flexibility to cut the radius along with the proven performance of the up-cut design for superior chip ejection.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 3/16" |
| Application | |
| Material | Solid Carbide |
| Product Type | End Mill Bit |
| Length | 2" |
| Degree of Cut | |
| Shank Diameter | 1/4" |