1/2" x 2-1/4" Economy Insert Flush Trim Bit, 1/2" Shank
Item # ANRC-2000
•Mfr # RC-2000
$65.96
/Each
Min Order: 1
Qty mult. by: 1
Product Details
Get the practicality and productivity of an insert bit for the cost of a standard brazed-tip bit. The small two-sided carbide insert knives usually can be changed without altering the bit setup in the router. Because the knives aren't heated for brazing, it can be made of a harder grade of carbide and it will hold its edge longer. Ideal for both standard routers and laminate trimmers. 5/16" of cutting height.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 1/2" |
| Application | |
| Material | Solid Carbide |
| Product Type | Flush Trim Bit |
| Length | 2-1/4" |
| Degree of Cut | |
| Shank Diameter | 1/4" |
Item # ANRC-2000
•Mfr # RC-2000
$65.96
/Each
Min Order: 1
Qty mult. by: 1
Product Details
Get the practicality and productivity of an insert bit for the cost of a standard brazed-tip bit. The small two-sided carbide insert knives usually can be changed without altering the bit setup in the router. Because the knives aren't heated for brazing, it can be made of a harder grade of carbide and it will hold its edge longer. Ideal for both standard routers and laminate trimmers. 5/16" of cutting height.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 1/2" |
| Application | |
| Material | Solid Carbide |
| Product Type | Flush Trim Bit |
| Length | 2-1/4" |
| Degree of Cut | |
| Shank Diameter | 1/4" |