3/4" x 2-1/4" Bottom Cleaning/Spoilboard Router Bit, 2-Flute, 1/4" Shank
Item # AN45560
•Mfr # 45560
$40.52
/Each
Min Order: 1
Quantity Multiple by: 1
Product Details
This bit is intended for broad, very shallow cuts, where an exceptional finish is desired. Use it to clean up previously cut dadoes and grooves or for surfacing cuts. The up-shear configuration improves chip removal, while the cutting-edge orientation produces a smooth surface.
Features:
• 7/16" of cutting height
• Up shear design
Features:
• 7/16" of cutting height
• Up shear design
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Height | |
| Width | |
| Cutting Diameter | 3/4" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Bottom Cleaning/Spoilboard Router Bit |
| Length | 2-1/4" |
| Degree of Cut | |
| Shank Diameter | 1/4" |
Item # AN45560
•Mfr # 45560
$40.52
/Each
Min Order: 1
Quantity Multiple by: 1
Product Details
This bit is intended for broad, very shallow cuts, where an exceptional finish is desired. Use it to clean up previously cut dadoes and grooves or for surfacing cuts. The up-shear configuration improves chip removal, while the cutting-edge orientation produces a smooth surface.
Features:
• 7/16" of cutting height
• Up shear design
Features:
• 7/16" of cutting height
• Up shear design
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Height | |
| Width | |
| Cutting Diameter | 3/4" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Bottom Cleaning/Spoilboard Router Bit |
| Length | 2-1/4" |
| Degree of Cut | |
| Shank Diameter | 1/4" |