1/8" x 2-1/4" Zero-Point ZrN Coated V-Groove/Engraving Router Bit, 2-Flute, 1/4" Shank
Item # AN45609
•Mfr # 45609
$54.38
/Each
Min Order: 1
Qty mult. by: 1
Product Details
Benefits of ZrN Coating:
• Creates a harder and tougher cutting edge allows for a prolonged cutting edge life and helps to prevent the build-up of material in the flutes while cutting
• High resistance to wear
• Extended tool life
• Less friction & heat buildup
• High resistance to wear
Designed for beveling or V-Grooving 90? the following materials:
• Acrylonitrile-Butadiene-Styrene (ABS)
• Aluminum, Brass, Bronze, Copper, Gold & Silver
• Aluminum 5052
• Composites
• Fomex with Aluminum Face
• Hard Plastics
• Hardwood
• Laminated Chipboard/Plywood
• MDF
• Non-Ferrous Metals
• Polycarbonate (Lexan)
• Solid Surfaces (Corian, Formica ect)
• Soft Plastics
• Softwood
• Veneer
Recommendation: Use the slowest suggested feed rates and the shortest bits necessary for cutting and routing Lexan.
• Creates a harder and tougher cutting edge allows for a prolonged cutting edge life and helps to prevent the build-up of material in the flutes while cutting
• High resistance to wear
• Extended tool life
• Less friction & heat buildup
• High resistance to wear
Designed for beveling or V-Grooving 90? the following materials:
• Acrylonitrile-Butadiene-Styrene (ABS)
• Aluminum, Brass, Bronze, Copper, Gold & Silver
• Aluminum 5052
• Composites
• Fomex with Aluminum Face
• Hard Plastics
• Hardwood
• Laminated Chipboard/Plywood
• MDF
• Non-Ferrous Metals
• Polycarbonate (Lexan)
• Solid Surfaces (Corian, Formica ect)
• Soft Plastics
• Softwood
• Veneer
Recommendation: Use the slowest suggested feed rates and the shortest bits necessary for cutting and routing Lexan.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 1/8" |
| Application | |
| Material | Solid Carbide |
| Product Type | V-Groove/Engraving Router Bit |
| Length | 2-1/4" |
| Degree of Cut | 90° |
| Shank Diameter | 1/4" |
Item # AN45609
•Mfr # 45609
$54.38
/Each
Min Order: 1
Qty mult. by: 1
Product Details
Benefits of ZrN Coating:
• Creates a harder and tougher cutting edge allows for a prolonged cutting edge life and helps to prevent the build-up of material in the flutes while cutting
• High resistance to wear
• Extended tool life
• Less friction & heat buildup
• High resistance to wear
Designed for beveling or V-Grooving 90? the following materials:
• Acrylonitrile-Butadiene-Styrene (ABS)
• Aluminum, Brass, Bronze, Copper, Gold & Silver
• Aluminum 5052
• Composites
• Fomex with Aluminum Face
• Hard Plastics
• Hardwood
• Laminated Chipboard/Plywood
• MDF
• Non-Ferrous Metals
• Polycarbonate (Lexan)
• Solid Surfaces (Corian, Formica ect)
• Soft Plastics
• Softwood
• Veneer
Recommendation: Use the slowest suggested feed rates and the shortest bits necessary for cutting and routing Lexan.
• Creates a harder and tougher cutting edge allows for a prolonged cutting edge life and helps to prevent the build-up of material in the flutes while cutting
• High resistance to wear
• Extended tool life
• Less friction & heat buildup
• High resistance to wear
Designed for beveling or V-Grooving 90? the following materials:
• Acrylonitrile-Butadiene-Styrene (ABS)
• Aluminum, Brass, Bronze, Copper, Gold & Silver
• Aluminum 5052
• Composites
• Fomex with Aluminum Face
• Hard Plastics
• Hardwood
• Laminated Chipboard/Plywood
• MDF
• Non-Ferrous Metals
• Polycarbonate (Lexan)
• Solid Surfaces (Corian, Formica ect)
• Soft Plastics
• Softwood
• Veneer
Recommendation: Use the slowest suggested feed rates and the shortest bits necessary for cutting and routing Lexan.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 1/8" |
| Application | |
| Material | Solid Carbide |
| Product Type | V-Groove/Engraving Router Bit |
| Length | 2-1/4" |
| Degree of Cut | 90° |
| Shank Diameter | 1/4" |