1" x 1/4" Radius Corner Rounding Bit with Ball Bearing Guide Solid Surface, 2-Flute, 1/2" Shank
Item # AN57149
•Mfr # 57149
$49.86
/Each
Product Details
Use this bit for rounding edges where there's access to a flat surface for the Ultra-Glide non-marring bearing to reference. Used in concert with either the Counter-top ('No-Drip') Design bit or the corner-rounding bit with a radius bearing, this bit will produce a no-drip edge or a bullnose in two passes. 1/2" of cutting height.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Height | |
| Width | |
| Cutting Diameter | 1" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Corner Rounding Bit |
| Length | 2-7/16" |
| Degree of Cut | |
| Shank Diameter | 1/2" |
Item # AN57149
•Mfr # 57149
$49.86
/Each
Product Details
Use this bit for rounding edges where there's access to a flat surface for the Ultra-Glide non-marring bearing to reference. Used in concert with either the Counter-top ('No-Drip') Design bit or the corner-rounding bit with a radius bearing, this bit will produce a no-drip edge or a bullnose in two passes. 1/2" of cutting height.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Height | |
| Width | |
| Cutting Diameter | 1" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Corner Rounding Bit |
| Length | 2-7/16" |
| Degree of Cut | |
| Shank Diameter | 1/2" |