3/4" x 4-5/16" Insert Flush Trim Bit, 2-Flute, 1/2" Shank
Item # ANRC-1006
•Mfr # RC-1006
$117.08
/Each
Min Order: 1
Qty mult. by: 1
Product Details
In a production environment, insert tooling reduces downtime to a minimum. Each throw-away insert knife in this flush trimming bit has multiple edges. Rotate the knife to expose a fresh cutting edge. Tips can be replaced at any time, even mid-job, without changing the router setup. Has two cutting edges per knife. This tool is meant for difficult work. The knives are held with 3 screws. 50mm of cutting height.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 3/4" |
| Application | |
| Material | Solid Carbide |
| Product Type | Flush Trim Bit |
| Length | 4-5/16" |
| Degree of Cut | |
| Shank Diameter | 1/2" |
Item # ANRC-1006
•Mfr # RC-1006
$117.08
/Each
Min Order: 1
Qty mult. by: 1
Product Details
In a production environment, insert tooling reduces downtime to a minimum. Each throw-away insert knife in this flush trimming bit has multiple edges. Rotate the knife to expose a fresh cutting edge. Tips can be replaced at any time, even mid-job, without changing the router setup. Has two cutting edges per knife. This tool is meant for difficult work. The knives are held with 3 screws. 50mm of cutting height.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 3/4" |
| Application | |
| Material | Solid Carbide |
| Product Type | Flush Trim Bit |
| Length | 4-5/16" |
| Degree of Cut | |
| Shank Diameter | 1/2" |