1/4" x 2-1/2" Spektra Up-Cut Phenolic/Resin/Composite Spiral Router Bit with Chipbreaker, 3-Flute, 1/4" Shank

This tool is designed especially to cut phenolics resin composite.

Solid carbide tooling with chip breakers that will effectively "shatter and evacuate" the chips typically produced by phenolic materials. Providing an aggressive bite, combined with a moderate helix, walking the fine line between cutting efficiency and a minimal burr finish on abrasive phenolics oftentimes impregnated with fiberglass, wood or linen. 3/4" of cutting height

Excellent for Cutting:
• Carbon fiber
• Carbon fiber reinforced plastic
• Carbon graphite
• Plastic, PVC and Acrylic
• Fiberglass
• Hard wood
• Veneered plywood
• Laminate

Our Spektra bits feature a nACo nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.

• nACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
• Coating prevents high heat and oxidation which is detrimental to cutting tool performance.
• Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective.
• nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits.

Note: Blue based color dissipates immediately upon use. nACo nanocomposite coating will not wear off.