1/4" x 2-1/2" Spektra Plastic Cutting 'V' Triple Straight Bit, 3-Flute, 1/4" Shank
Item # AN46483-K
•Mfr # 46483-K
$52.26
/Each
Min Order: 1
Qty mult. by: 1
Product Details
Used for routing harder and more rigid plastics in the following materials: Acrylic, Acetal, Nylon, PVC, ABS, Phenolic, Corian, Poly (methyl methacrylate) (PMMA), Acrylic Stone, Coroplast, etc. 35000 RPM maximum. 1" cutting height.
Excellent for Cutting:
• Plastic
• Acetal
• Acrylic
• Acrylic Stone
• Acrylonitrile Butadiene Styrene (ABS)
• Alupanel
• Copolymer
• Corian
• Coroplast
• Corrugated Polypropylene
• Delrin
• Ethylene-Vinyl Acetate
• Foam Board
• Fomex
• Gator Board
• High Density Polyethylene (HDPE)
• High Impact Polystyrene (HIPS)
• High Pressure Laminates (HPL)
• Hydroxy-Terminated Polyether (HTPE)
• Low Density Polyethylene (LDPE)
• LubX
• Lucite
• Mechanical/Engineered Plastics
• Nitrite Rubber
• Nylon
• Perspex Cast Acrylic Sheet
• Phenolic
• Plexiglas
• Polyethylene (PE)
• Polyethylene Terephthalate (PET)
• Polyethylene Terephthalate Glycol-Modified (PETG / PET-G)
• Poly (methyl methacrylate) (PMMA)
• Polycarbonate
• Polypropylene (PP)
• Polyoxymethylene (POM), also known as Acetal, Polyacetal and Polyformaldehyde
• PVC
• Sign Foam
• StarBoard (King StarBoard 'R') High Density Polyethylene Sheet (HDPE)
• Styrene-Acrylonitrile
• Styrene-Butadiene Rubber (SBR)
• Styrene-Isoprene-Styrene (SIS)
• Teflon
• Thermoplastic Polyolefin (TPO)
• Ultra High Molecular Weight Polyethylene (UHMW)
• Urethane
A soft plastic cardboard made with super soft, super flexible PVC.
Our Spektra bits feature a nACo nanocomposite coating with an extreme nano hardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.
• nACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality
• Coating prevents high heat and oxidation which is detrimental to cutting tool performance
• Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective
• nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits
Note: Blue based color dissipates immediately upon use. nACor nanocomposite coating will not wear off.
Excellent for Cutting:
• Plastic
• Acetal
• Acrylic
• Acrylic Stone
• Acrylonitrile Butadiene Styrene (ABS)
• Alupanel
• Copolymer
• Corian
• Coroplast
• Corrugated Polypropylene
• Delrin
• Ethylene-Vinyl Acetate
• Foam Board
• Fomex
• Gator Board
• High Density Polyethylene (HDPE)
• High Impact Polystyrene (HIPS)
• High Pressure Laminates (HPL)
• Hydroxy-Terminated Polyether (HTPE)
• Low Density Polyethylene (LDPE)
• LubX
• Lucite
• Mechanical/Engineered Plastics
• Nitrite Rubber
• Nylon
• Perspex Cast Acrylic Sheet
• Phenolic
• Plexiglas
• Polyethylene (PE)
• Polyethylene Terephthalate (PET)
• Polyethylene Terephthalate Glycol-Modified (PETG / PET-G)
• Poly (methyl methacrylate) (PMMA)
• Polycarbonate
• Polypropylene (PP)
• Polyoxymethylene (POM), also known as Acetal, Polyacetal and Polyformaldehyde
• PVC
• Sign Foam
• StarBoard (King StarBoard 'R') High Density Polyethylene Sheet (HDPE)
• Styrene-Acrylonitrile
• Styrene-Butadiene Rubber (SBR)
• Styrene-Isoprene-Styrene (SIS)
• Teflon
• Thermoplastic Polyolefin (TPO)
• Ultra High Molecular Weight Polyethylene (UHMW)
• Urethane
A soft plastic cardboard made with super soft, super flexible PVC.
Our Spektra bits feature a nACo nanocomposite coating with an extreme nano hardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.
• nACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality
• Coating prevents high heat and oxidation which is detrimental to cutting tool performance
• Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective
• nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits
Note: Blue based color dissipates immediately upon use. nACor nanocomposite coating will not wear off.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 1/4" |
| Application | |
| Material | Solid Carbide |
| Product Type | Straight Bit |
| Length | 2-1/2" |
| Degree of Cut | |
| Shank Diameter | 1/4" |
Item # AN46483-K
•Mfr # 46483-K
$52.26
/Each
Min Order: 1
Qty mult. by: 1
Product Details
Used for routing harder and more rigid plastics in the following materials: Acrylic, Acetal, Nylon, PVC, ABS, Phenolic, Corian, Poly (methyl methacrylate) (PMMA), Acrylic Stone, Coroplast, etc. 35000 RPM maximum. 1" cutting height.
Excellent for Cutting:
• Plastic
• Acetal
• Acrylic
• Acrylic Stone
• Acrylonitrile Butadiene Styrene (ABS)
• Alupanel
• Copolymer
• Corian
• Coroplast
• Corrugated Polypropylene
• Delrin
• Ethylene-Vinyl Acetate
• Foam Board
• Fomex
• Gator Board
• High Density Polyethylene (HDPE)
• High Impact Polystyrene (HIPS)
• High Pressure Laminates (HPL)
• Hydroxy-Terminated Polyether (HTPE)
• Low Density Polyethylene (LDPE)
• LubX
• Lucite
• Mechanical/Engineered Plastics
• Nitrite Rubber
• Nylon
• Perspex Cast Acrylic Sheet
• Phenolic
• Plexiglas
• Polyethylene (PE)
• Polyethylene Terephthalate (PET)
• Polyethylene Terephthalate Glycol-Modified (PETG / PET-G)
• Poly (methyl methacrylate) (PMMA)
• Polycarbonate
• Polypropylene (PP)
• Polyoxymethylene (POM), also known as Acetal, Polyacetal and Polyformaldehyde
• PVC
• Sign Foam
• StarBoard (King StarBoard 'R') High Density Polyethylene Sheet (HDPE)
• Styrene-Acrylonitrile
• Styrene-Butadiene Rubber (SBR)
• Styrene-Isoprene-Styrene (SIS)
• Teflon
• Thermoplastic Polyolefin (TPO)
• Ultra High Molecular Weight Polyethylene (UHMW)
• Urethane
A soft plastic cardboard made with super soft, super flexible PVC.
Our Spektra bits feature a nACo nanocomposite coating with an extreme nano hardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.
• nACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality
• Coating prevents high heat and oxidation which is detrimental to cutting tool performance
• Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective
• nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits
Note: Blue based color dissipates immediately upon use. nACor nanocomposite coating will not wear off.
Excellent for Cutting:
• Plastic
• Acetal
• Acrylic
• Acrylic Stone
• Acrylonitrile Butadiene Styrene (ABS)
• Alupanel
• Copolymer
• Corian
• Coroplast
• Corrugated Polypropylene
• Delrin
• Ethylene-Vinyl Acetate
• Foam Board
• Fomex
• Gator Board
• High Density Polyethylene (HDPE)
• High Impact Polystyrene (HIPS)
• High Pressure Laminates (HPL)
• Hydroxy-Terminated Polyether (HTPE)
• Low Density Polyethylene (LDPE)
• LubX
• Lucite
• Mechanical/Engineered Plastics
• Nitrite Rubber
• Nylon
• Perspex Cast Acrylic Sheet
• Phenolic
• Plexiglas
• Polyethylene (PE)
• Polyethylene Terephthalate (PET)
• Polyethylene Terephthalate Glycol-Modified (PETG / PET-G)
• Poly (methyl methacrylate) (PMMA)
• Polycarbonate
• Polypropylene (PP)
• Polyoxymethylene (POM), also known as Acetal, Polyacetal and Polyformaldehyde
• PVC
• Sign Foam
• StarBoard (King StarBoard 'R') High Density Polyethylene Sheet (HDPE)
• Styrene-Acrylonitrile
• Styrene-Butadiene Rubber (SBR)
• Styrene-Isoprene-Styrene (SIS)
• Teflon
• Thermoplastic Polyolefin (TPO)
• Ultra High Molecular Weight Polyethylene (UHMW)
• Urethane
A soft plastic cardboard made with super soft, super flexible PVC.
Our Spektra bits feature a nACo nanocomposite coating with an extreme nano hardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.
• nACo coating is a micro-thin ceramic coating which enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality
• Coating prevents high heat and oxidation which is detrimental to cutting tool performance
• Multi-colored hues, while attractive, will dissipate upon use and yet coating will remain fully effective
• nACo offers approximately 4,500 Vickers for impressive solid hardness on cutting areas of the tool, for an increase up to 2.5 times compared to uncoated bits
Note: Blue based color dissipates immediately upon use. nACor nanocomposite coating will not wear off.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 1/4" |
| Application | |
| Material | Solid Carbide |
| Product Type | Straight Bit |
| Length | 2-1/2" |
| Degree of Cut | |
| Shank Diameter | 1/4" |