1/2" x 3-5/8" Extra-Long Flush Trim Bit, 3-Flute, 1/2" Shank
Item # AN47118-2
•Mfr # 47118-2
$43.66
/Each
Min Order: 1
Qty mult. by: 1
Product Details
Use these flush trim router bits for laminate work and for template and pattern work. For template applications, the bearing follows the template, while the cutting edges trim the workpiece. With the router hand-held, the template is on the bottom of the work. With a table-mounted router, the template is on top.
Features:
• Three-flute configuration is especially good to use on laminates that tend to chip easily
• Carbide tipped
• Extremely smooth finish
• 1" of cutting height
Features:
• Three-flute configuration is especially good to use on laminates that tend to chip easily
• Carbide tipped
• Extremely smooth finish
• 1" of cutting height
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 1/2" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Flush Trim Bit |
| Length | 3-5/8" |
| Degree of Cut | |
| Shank Diameter | 1/2" |
Item # AN47118-2
•Mfr # 47118-2
$43.66
/Each
Min Order: 1
Qty mult. by: 1
Product Details
Use these flush trim router bits for laminate work and for template and pattern work. For template applications, the bearing follows the template, while the cutting edges trim the workpiece. With the router hand-held, the template is on the bottom of the work. With a table-mounted router, the template is on top.
Features:
• Three-flute configuration is especially good to use on laminates that tend to chip easily
• Carbide tipped
• Extremely smooth finish
• 1" of cutting height
Features:
• Three-flute configuration is especially good to use on laminates that tend to chip easily
• Carbide tipped
• Extremely smooth finish
• 1" of cutting height
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 1/2" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Flush Trim Bit |
| Length | 3-5/8" |
| Degree of Cut | |
| Shank Diameter | 1/2" |