16mm x 8mm x 5mm Steel Ball Bearing Guide
Item # AN47713
•Mfr # 47713
$16.18
/Each
Min Order: 1
Quantity Multiple by: 1
Product Details
Amana Tool uses only the finest industrial quality precision ball bearings available. Bearings are double steel-shielded for extra rigidity and to inhibit dust. A special high-performance, high-temperature grease is used for maximum life. With Teflon dust shields. Used as a substitute for 47712 for fine dust conditions.
Note: Solvents should not be used to clean ball bearings, as this will deteriorate the special grease. 'Frozen' bearings (ones that do not rotate freely), should be replaced immediately.
Note: Solvents should not be used to clean ball bearings, as this will deteriorate the special grease. 'Frozen' bearings (ones that do not rotate freely), should be replaced immediately.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Height | |
| Width | |
| Cutting Diameter | 16mm |
| Application | Ogee Raised Panel Bit with Back Cutter |
| Material | Steel |
| Product Type | Ball Bearing Guide |
| Length | |
| Degree of Cut | |
| Shank Diameter |
Item # AN47713
•Mfr # 47713
$16.18
/Each
Min Order: 1
Quantity Multiple by: 1
Product Details
Amana Tool uses only the finest industrial quality precision ball bearings available. Bearings are double steel-shielded for extra rigidity and to inhibit dust. A special high-performance, high-temperature grease is used for maximum life. With Teflon dust shields. Used as a substitute for 47712 for fine dust conditions.
Note: Solvents should not be used to clean ball bearings, as this will deteriorate the special grease. 'Frozen' bearings (ones that do not rotate freely), should be replaced immediately.
Note: Solvents should not be used to clean ball bearings, as this will deteriorate the special grease. 'Frozen' bearings (ones that do not rotate freely), should be replaced immediately.
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Height | |
| Width | |
| Cutting Diameter | 16mm |
| Application | Ogee Raised Panel Bit with Back Cutter |
| Material | Steel |
| Product Type | Ball Bearing Guide |
| Length | |
| Degree of Cut | |
| Shank Diameter |