7/8" x 2-7/8" Chamfer Bit, 2-Flute, 1/2" Shank
Item # AN49407
•Mfr # 49407
$49.67
/Each
Min Order: 1
Qty mult. by: 1
Product Details
Chamfer or bevel edges for decorative effect or to form edge miter joints. Produce crisp, uniform edges at accurate angles to make 4-sided, 6-sided, 8-sided, 12-sided, or 16-sided boxes. For best results use in a router table. 1" of cutting height.
Excellent for Cutting:
• Acrylic
• Laminate
• MDF/HDF
• Melamine
• Wood
• Plywood
Excellent for Cutting:
• Acrylic
• Laminate
• MDF/HDF
• Melamine
• Wood
• Plywood
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 7/8" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Chamfer Bit |
| Length | 2-7/8" |
| Degree of Cut | 11-1/4° |
| Shank Diameter | 1/2" |
Item # AN49407
•Mfr # 49407
$49.67
/Each
Min Order: 1
Qty mult. by: 1
Product Details
Chamfer or bevel edges for decorative effect or to form edge miter joints. Produce crisp, uniform edges at accurate angles to make 4-sided, 6-sided, 8-sided, 12-sided, or 16-sided boxes. For best results use in a router table. 1" of cutting height.
Excellent for Cutting:
• Acrylic
• Laminate
• MDF/HDF
• Melamine
• Wood
• Plywood
Excellent for Cutting:
• Acrylic
• Laminate
• MDF/HDF
• Melamine
• Wood
• Plywood
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | 7/8" |
| Application | |
| Material | Carbide Tipped |
| Product Type | Chamfer Bit |
| Length | 2-7/8" |
| Degree of Cut | 11-1/4° |
| Shank Diameter | 1/2" |