Timber Warmth And Countertop-Ready Durability In One Sheet
The SM'art High Pressure Laminate in SM4565 Olmo Miele is a 60-inch by 120-inch HPL sheet finished in a warm honey-oak timber decor. At 0.9 mm thick, it bonds to a fabricator-supplied substrate for countertops, high-wear vertical surfaces, and post-formed work that needs to carry the same warm wood tone as the surrounding SM'art TFL panel program.
Key Features
- SM4565 Olmo Miele timber decor delivers a warm, honey-toned oak grain character suited to contemporary and transitional cabinetry alike.
- 60-inch by 120-inch sheet size covers a generous run of countertop or cladding without a seam on most residential jobs.
- 0.9 mm thickness is the standard HPL gauge for post-formed and flat-bonded applications.
- Timber Finish surface provides a tactile wood-pore texture that reads naturally under raking light.
- High pressure laminate construction is a separately manufactured sheet bonded by the fabricator, offering harder wear performance than a thermally fused face.
- Color-matched to the SM'art decorative panel program, so face and edge read as one continuous surface when paired with matching SM'art TFL panels and ABS edgebanding.
Where This Sheet Fits In The Job
HPL is a fabricator-bonded product, which means it goes down over a substrate the shop supplies rather than arriving as a finished panel. That makes it the right call for countertops, desk surfaces, open shelving edges, and tall vertical cladding runs where a thermally fused panel face is not practical or where wear demands a harder surface than TFL can deliver. Olmo Miele's warm oak tone is a natural pairing for frame-and-panel doors in natural wood finishes and for mixed-material kitchens where the countertop surface needs to step down visually from a contrasting upper cabinet color. At 60 by 120 inches, a single sheet covers a standard base run from corner to cooktop without a visible joint.
Construction And Surface Character
High pressure laminate is manufactured by consolidating layers of kraft paper and a decorative surface paper under high pressure into a dense, rigid sheet. That process produces a surface harder and more impact-resistant than a melamine-fused face, which is why HPL is specified wherever the top surface takes daily contact. The Timber Finish on SM4565 carries a wood-pore emboss that adds physical depth to the honey-oak print, keeping the surface from reading flat even on a large uninterrupted plane. The 0.9 mm gauge is the standard for post-forming and flat bonding and is compatible with most contact-cement and hot-press application methods a production shop already uses.
Who Reaches For This Color
Cabinet shops running SM'art TFL panels on box and door work need a laminate sheet that closes the color story on the horizontal surfaces. Olmo Miele is a warmer, more amber-toned oak than the grey-washed woods that dominated the past decade, and it is finding a second audience in renovation work where homeowners want to move away from cool-grey interiors without committing to a dark walnut. Designers specifying a full room in a single warm wood tone will find that the SM'art program's matching components, TFL panels, ABS edgebanding, and this HPL sheet, cover every surface type from the box interior to the countertop face. The 60-inch sheet width is also practical for shops whose material handling equipment tops out before a 73-inch sheet.
Is matching edgebanding available for SM4565 Olmo Miele?
Yes. The SM'art collection includes matching ABS edgebanding for this color. Confirm the width needed against your panel thickness before ordering.
Does SM'art HPL come in a larger sheet size?
SM'art HPL is available in the 60-inch by 120-inch size only. If your layout requires a wider sheet, note that Saviola HPL within the SALT International program ships in both 60-inch and 73-inch widths, but those are a different collection and color program.
What substrate should I bond this to?
HPL is a sheet product bonded by the fabricator. Particleboard and MDF are the standard substrates for flat work; post-forming grades of particleboard are used when the sheet needs to wrap a radius. The substrate is not included and is sourced separately.
How does HPL differ from the SM'art TFL panel in the same color?
The TFL panel arrives with the decorative face already fused to the board, ready to cut and band. The HPL sheet is bonded to a substrate you supply, which adds a process step but gives you a harder, more impact-resistant surface and the flexibility to apply it to a countertop profile or a tall cladding run the panel size does not cover.
One Color Across Every Surface In The Room
Olmo Miele in the SM'art HPL sheet lets a warm honey-oak tone run from the cabinet box to the countertop without a color break, keeping the full project cohesive from the first cut to the final install.
