Wood Veneer Edgebanding, Cherry, 1.5mm Thick 7/8" x 328' Roll

FormWood's Form-Edge™ edgebanding is produced by joining individual pieces of veneer together into a continuous master roll by finger-jointing the veneer. The rolls are laminated with a fleece, then sanded and slit to finished widths. Finger joints are made by joining the veneer together using a die cut finger layout in the veneer and then gluing them together using joint tape. To ensure color and grain matching at the finger joint, every other piece of veneer is flipped end to end. The fleece (cellulous membrane) laminated to the back of the veneer provides strength to reduce cracking and breaking. The fleece is also colored to blend with the veneer to reduce any line between the banding and the substrate.

Features:
• Color: Cherry
• Thickness 0.020" plus or minus 0.002"
• Standard length of continuous veneer roll
• Gloss level between 20 and 30 is standard
• UV lacquer finish at 1.5 mils in coverage
• Material should be stored in plastic wrap to ensure moisture stability (reducing moisture loss)
• Pre-finished FormEdge is produced from A-grade finger jointed veneer selected for color and grain consistency
• A high quality, clear lacquer finish is applied
• The gloss level and finish is designed to match pre-finished hardwood panels
• Standard finish is "satin" clear coat
• The UV lacquer coating is resistant to heat, staining and scratching