High Pressure Laminate For Countertops, Vertical Surfaces, and Post-Formed Work
Saviola HPL in color GSP25 Uva delivers a factory-finished decorative surface in a large-format sheet sized to cover countertops, backsplashes, and vertical panel faces without a seam. At 0.9 mm thick with a Vanguard finish, this sheet bonds to the substrate in the shop and ships ready to fabricate.
Key Features
- Large-format sheet at 73 inches by 120 inches — sized for full-height vertical runs and wide countertop sections without a mid-panel joint.
- 0.9 mm thickness — the standard HPL caliper for countertop and post-form applications, bonded by the fabricator rather than fused at the mill.
- Vanguard finish — a defined surface texture from the Saviola collection that pairs color with a consistent tactile character across the sheet.
- GSP25 Uva color — a Saviola program color with a specific decor and tone; confirm against a physical sample before specifying across a large run.
- Sold by the sheet — one sheet per unit, priced and shipped as a single piece.
Where This Sheet Works Best
HPL is a fabricator-applied product: you bond it to a substrate, then trim, profile, and finish the edges. That makes it the right call for countertops that outlast a cabinet box, for post-formed work where the laminate wraps a curved nosing, and for high-contact vertical surfaces such as a desk return or a reception counter face. The 73-inch by 120-inch sheet clears most residential countertop depths and many commercial vertical panel heights in a single piece, which reduces the seaming work on a large installation. A matching HPL sheet also lets you carry a Saviola TFL panel color onto a surface the panel itself does not cover, keeping the color program consistent across a project.
Surface, Thickness, and Construction
High pressure laminate is manufactured as a separate sheet — layers of kraft paper and a decorative surface paper consolidated under high pressure — then bonded to the substrate by the fabricator using contact cement or a press. That process is different from TFL, where the decorative face is fused directly to the board at the mill. The difference matters at the edge: an HPL sheet can be profiled, trimmed flush, and finished in ways a TFL face cannot. At 0.9 mm, this sheet sits at the standard caliper for countertop and moderate post-form work. The Vanguard finish gives the surface its texture and sheen; the color decor is GSP25 Uva.
Who Specifies and Uses This Sheet
Cabinet shops specifying a coordinated color across panel and countertop reach for this sheet when the Saviola panel program is already on the job. Countertop fabricators use it on substrate runs where the surface needs to outlast the cabinet box beneath it. Designers specifying a project in a Saviola color rely on the matching HPL to extend the palette onto post-formed edges and high-wear horizontal surfaces. This sheet ships in one size — 73 inches by 120 inches — so confirm your layout before ordering if the job calls for the 60-inch-wide format instead.
Frequently Asked Questions
Does this HPL ship in any other size?
Saviola HPL is stocked in both 73-inch by 120-inch and 60-inch by 120-inch sheets. This listing is the wider sheet. If your shop cannot process a 73-inch panel or if your layout requires the narrower format, order the 60-inch sheet separately.
Is this the same color as the Saviola TFL panel in GSP25 Uva?
Yes. Saviola HPL sheets are produced as matching companions to the TFL panel program, so GSP25 Uva in HPL is the same color code and decor as the TFL panel in that color. Always verify with a physical sample across the two surfaces before specifying them together in the same sightline.
What substrate does this HPL bond to?
HPL bonds to particleboard, MDF, and plywood using contact cement or a press. The substrate choice is the fabricator's call based on the application — MDF for a profiled edge, particleboard for a flat countertop run. The laminate sheet itself is substrate-neutral.
Is this sheet suitable for exterior applications?
This is an interior decorative HPL. It is not rated for exterior exposure or direct weather contact. Use it for indoor countertops, vertical surfaces, and casework.
Does matching ABS edgebanding exist for this color?
Matching ABS edgebanding is available for Saviola collection colors. Confirm availability for GSP25 Uva when ordering to ensure the edge and face read as the same color.
One Sheet That Completes the Color Program
When a project runs Saviola TFL panels through the boxes and doors, the HPL sheet in GSP25 Uva closes the loop on countertops and post-formed surfaces — same color, fabricator-applied, and ready to trim flush to the job.
