Full-Format HPL Sheet For Concrete-Look Countertops and Vertical Surfaces
The Saviola High Pressure Laminate in GSDA4 Cimento delivers a refined concrete aesthetic in a full-format 73-inch by 120-inch sheet, sized to cover wide countertops, reception desks, and large vertical panels without a seam. At 0.9 mm thick in the Artstone finish, it bonds directly to a substrate of the fabricator's choosing and carries the same decor as the Saviola TFL panel collection for a consistent, coordinated result across cabinet boxes and exposed surfaces alike.
Key Features
- Full-format 73 x 120 inch sheet covers wide runs and reduces visible seams on large horizontal and vertical surfaces.
- 0.9 mm HPL construction is a separately manufactured sheet bonded by the fabricator, not a fused panel face.
- Artstone finish gives the Cimento decor a stone-like surface texture suited to contemporary work.
- GSDA4 Cimento color coordinates with the Saviola TFL decorative panel collection for matched casework and surface treatments.
- Part of the Saviola program, which includes matching ABS edgebanding for cut edges on the companion TFL panels.
Where This Sheet Fits the Work
A full-format HPL sheet at 73 by 120 inches is the right choice when the job calls for a horizontal surface wider than a standard 4-by-8 panel can cover cleanly. Countertops on wide kitchen islands, reception desk tops, conference room credenzas, and retail display surfaces all benefit from the extra width, which eliminates a field-visible seam and simplifies layout. The 120-inch length accommodates most standard runs end to end. On vertical work, the same sheet covers a floor-to-ceiling wall panel in a single piece for a clean, unbroken concrete look that a narrower sheet cannot match without a joint.
This sheet bonds down after fabrication, so the substrate and adhesive are the fabricator's call. It does not arrive attached to a board, and it is not interchangeable with the TFL panel of the same color. Use it where the substrate is site-built, post-formed, or otherwise outside what a prefinished panel ships as.
Construction and Surface Character
High pressure laminate is manufactured independently from the substrate: kraft paper layers and a decorative surface paper are consolidated under high pressure into a rigid sheet, which the fabricator then bonds down. That process produces a harder, denser surface than thermally fused laminate and holds up well under direct wear on horizontal applications. The Artstone finish on the Cimento decor contributes a tactile stone character that reads as intentional on a concrete-look surface rather than as an approximation of it. At 0.9 mm, the sheet thickness is standard for vertical and light horizontal work and will post-form on appropriate equipment.
Who Orders This Sheet
Cabinet shops specifying a full kitchen or commercial build in the Saviola program reach for this sheet when the countertop or open shelving needs to match the cabinet box color exactly. Commercial millwork fabricators use it on reception desks and retail fixtures where the substrate is shop-built and the surface needs to survive daily contact. Designers specifying a concrete aesthetic for a hospitality or office interior find the Cimento color and Artstone texture a practical path to the look without the weight or variability of real stone. The 73-inch width is an important detail for shops that can handle a wide sheet and want to eliminate the seam a standard-width sheet would force.
Is this HPL sheet the same product as the Saviola TFL panel in GSDA4 Cimento?
No. The TFL panel has the Cimento decor fused directly to a particleboard core and ships as a finished board. This HPL sheet is a separately manufactured laminate the fabricator bonds to their own substrate. They share the same color code and are designed to coordinate, but they are different products used at different points in the fabrication process.
Does matching ABS edgebanding exist for GSDA4 Cimento?
Matching ABS edgebanding is available for the Saviola TFL panel in this color. Edgebanding is sized for the panel edge, not for a bonded HPL surface, so confirm the application before ordering.
Can this sheet be used on a countertop that will take direct water exposure?
The HPL sheet itself is dense and non-porous, but the assembly's moisture performance depends on the substrate, adhesive, and edge treatment the fabricator uses. This sheet is for interior applications. It is not rated for exterior use or continuous wet environments.
What substrate is required?
The source data does not specify a required substrate. HPL in this thickness bonds to particleboard, MDF, and plywood with appropriate contact cement or PVA adhesive. The substrate choice is the fabricator's responsibility and should match the performance requirements of the application.
The Right Surface for the Job
The Saviola HPL sheet in GSDA4 Cimento brings a concrete-look surface to countertops and large vertical panels in a format wide enough to work without compromise. When the Saviola TFL program specifies the cabinet box, this sheet closes the loop on every surface that a prefinished panel cannot reach.
