Screw-On Cabinet Leg Leveler with 30mm Knock-In Socket

An alternative for base cabinet construction and installation. Save time and material by eliminating toe kick notching. Install at jobsite. Following installation, attach a continuous toe kick strip for a clean, finished appearance. Easy height adjustment without shimming (3 3?4" to 5 1?2"). Levelers screw on or press into the bottom of the cabinet.

Features:
• Load capacity of up to 850 lb per set of four levelers
• Toe kick can be easily removed to allow access for cleaning or extermination
• Adjustable from either the inside or the outside of the cabinet with only a standard slotted screwdriver

Installation:
• Assemble leg levelers
• Attach the mounting block during cabinet construction and install the leg at cabinet installation
• Drill the mounting hole center 26 mm behind the back edge of the toe kick and 26 mm to the inside of the side panel
• Attach the mounting block with the large flange towards the center of the cabinet so that the small flange supports the cabinet side panel
• Use standard screwdriver.