Powermatic CNC Hold Downs, SET/2
Item # JPW1797000
•Mfr # PM9-1797000
$39.99
/Each
Min Order: 1
Quantity Multiple by: 1
Drop Ship Item
This item ships directly from the vendor. Additional freight charges may apply.
Product Details
Set of two hold downs for securing material to the CNC table
• Set of 2 Clamps.
• 1-1/8" wide by 5-1/4" long aluminum arm.
• 5/16" T-bolt.
• Set of 2 Clamps.
• 1-1/8" wide by 5-1/4" long aluminum arm.
• 5/16" T-bolt.
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Product Type | Hold Down |
| Power | |
| Frequency | |
| Capacity | |
| Finish | |
| Drum Speed | |
| Blade Diameter | |
| Tank Storage | |
| Speed | |
| Maximum Cutting Length | |
| Maximum Width | |
| Motor Power | |
| Maximum Pressure | |
| Pump Up Time | |
| Arbor Diameter | |
| Arbor | |
| Width | |
| Height | |
| Drive Motor | |
| Belt Size | |
| Depth | |
| Motor Phase | |
| Horsepower | |
| Phase | |
| Range of Speeds | |
| Length | |
| Voltage | |
| Backing Material | |
| Material | |
| Recovery Time |
Item # JPW1797000
•Mfr # PM9-1797000
$39.99
/Each
Min Order: 1
Quantity Multiple by: 1
Drop Ship Item
This item ships directly from the vendor. Additional freight charges may apply.
Product Details
Set of two hold downs for securing material to the CNC table
• Set of 2 Clamps.
• 1-1/8" wide by 5-1/4" long aluminum arm.
• 5/16" T-bolt.
• Set of 2 Clamps.
• 1-1/8" wide by 5-1/4" long aluminum arm.
• 5/16" T-bolt.
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Product Type | Hold Down |
| Power | |
| Frequency | |
| Capacity | |
| Finish | |
| Drum Speed | |
| Blade Diameter | |
| Tank Storage | |
| Speed | |
| Maximum Cutting Length | |
| Maximum Width | |
| Motor Power | |
| Maximum Pressure | |
| Pump Up Time | |
| Arbor Diameter | |
| Arbor | |
| Width | |
| Height | |
| Drive Motor | |
| Belt Size | |
| Depth | |
| Motor Phase | |
| Horsepower | |
| Phase | |
| Range of Speeds | |
| Length | |
| Voltage | |
| Backing Material | |
| Material | |
| Recovery Time |