1-3/32" Dia x 1/2" Carbide Tipped Glue Joint, 1/2" Shank
Product Details
The glue joint cut by this bit is strong and self-aligning. One setup produces both halves of the joint. Adjust the bit so the center of its profile aligns with the stock center. Cut one part face down, the mate face up. Bit works on stock between 5/8" and 1" in thickness. Must be used in a table-mounted router. Since there is no guide bearing, use the router-table fence to control the cut. Features: • 1-3/32" Dia x 1/2" Carbide Tipped Glue Joint, 1/2" Shank • Flutes: 2
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | 1-3/32" |
| Width | |
| Cutting Diameter | 1-7/8" x 1-7/16" |
| Application | |
| Material | |
| Product Type | Glue Joint |
| Length | 2-5/8" |
| Degree of Cut | |
| Shank Diameter | 1/2" |
Product Details
The glue joint cut by this bit is strong and self-aligning. One setup produces both halves of the joint. Adjust the bit so the center of its profile aligns with the stock center. Cut one part face down, the mate face up. Bit works on stock between 5/8" and 1" in thickness. Must be used in a table-mounted router. Since there is no guide bearing, use the router-table fence to control the cut. Features: • 1-3/32" Dia x 1/2" Carbide Tipped Glue Joint, 1/2" Shank • Flutes: 2
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | 1-3/32" |
| Width | |
| Cutting Diameter | 1-7/8" x 1-7/16" |
| Application | |
| Material | |
| Product Type | Glue Joint |
| Length | 2-5/8" |
| Degree of Cut | |
| Shank Diameter | 1/2" |