Safety Speed 43 X 75 Wide Belt Sander 20 HP 3Ph
Item # SSWBS4375203
•Mfr # WBS4375203
$21,473.00
/Each
Freight: $549.00
Min Order: 1
Qty mult. by: 1
This item may incur additional shipping costs and lead times.
Product Details
The 43" Wide Belt Sander features a 75" belt providing 25% more abrasive surface than the smaller 60" belt machines. The larger belt translates to increased capacity, less heat accumulation, less maintenance and fewer belt replacements. With a fully adjustable platen these sanders will deliver a perfect smooth finish every time.
Features:
• 20 Hp, 3 phase (3~), 208 Volt / 230 Volt
• Photo electric belt tracking
• Pneumatic belt tension
• 2-1/2" graphite covered felt pad and adjustable platen
• 2 rubber-covered pinch rollers 2-1/2" OD
• 2 machined idler rollers 4-1/4" OD with 1" bearings
• Rubber-covered contact roller 5-1/4" OD with 1-5/8" drive bearing
• Conveyor table set on four 1" acme thread jackscrews
• 2 height adjustment indicators
• 6" internal dust chute
• 5 emergency stops
• 3 year warranty
Features:
• 20 Hp, 3 phase (3~), 208 Volt / 230 Volt
• Photo electric belt tracking
• Pneumatic belt tension
• 2-1/2" graphite covered felt pad and adjustable platen
• 2 rubber-covered pinch rollers 2-1/2" OD
• 2 machined idler rollers 4-1/4" OD with 1" bearings
• Rubber-covered contact roller 5-1/4" OD with 1-5/8" drive bearing
• Conveyor table set on four 1" acme thread jackscrews
• 2 height adjustment indicators
• 6" internal dust chute
• 5 emergency stops
• 3 year warranty
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Downloads
Specifications
| Box Quantity | 1 |
| Product Type | Wide Belt Sander |
| Voltage | 208V/230V |
| Belt Size | 43" x 75" |
| Phase | 3 |
| Drive Motor | 20HP |
| Horsepower | |
| Feed Motor Power (HP) | |
| Sanding Belt Speed (FPM) | |
| Drum Diameter (In.) | |
| Minimum Board Thickness (In.) | |
| Style (Type) | |
| Motor Power (HP) | |
| Motor Phase | |
| Table Lift Motor Power | |
| Table Size (L x W) (In.) | |
| Sanding Belt Size (In.) | |
| Electrical Controls | |
| Table Height from Floor (In.) | |
| Maximum Board Thickness (In.) | |
| Maximum Board Width (In.) | |
| Prewired Voltage (V.) | |
| Dust Collection Minimum CFM Required (CFM) | |
| Recommended Circuit Size (Amps.) | |
| Wiring Remarks | |
| Motor Current (Amps) | |
| Dust Port Outside Diameter (In.) | |
| Air Required | |
| Table Tilt (Deg.) | |
| Motor Voltage (V.) | |
| Minimum Board Length (In.) | |
| Feed Rate (FPM) | |
| Platen Size (In.) | |
| Warranty |
Item # SSWBS4375203
•Mfr # WBS4375203
$21,473.00
/Each
Freight: $549.00
Min Order: 1
Qty mult. by: 1
This item may incur additional shipping costs and lead times.
Product Details
The 43" Wide Belt Sander features a 75" belt providing 25% more abrasive surface than the smaller 60" belt machines. The larger belt translates to increased capacity, less heat accumulation, less maintenance and fewer belt replacements. With a fully adjustable platen these sanders will deliver a perfect smooth finish every time.
Features:
• 20 Hp, 3 phase (3~), 208 Volt / 230 Volt
• Photo electric belt tracking
• Pneumatic belt tension
• 2-1/2" graphite covered felt pad and adjustable platen
• 2 rubber-covered pinch rollers 2-1/2" OD
• 2 machined idler rollers 4-1/4" OD with 1" bearings
• Rubber-covered contact roller 5-1/4" OD with 1-5/8" drive bearing
• Conveyor table set on four 1" acme thread jackscrews
• 2 height adjustment indicators
• 6" internal dust chute
• 5 emergency stops
• 3 year warranty
Features:
• 20 Hp, 3 phase (3~), 208 Volt / 230 Volt
• Photo electric belt tracking
• Pneumatic belt tension
• 2-1/2" graphite covered felt pad and adjustable platen
• 2 rubber-covered pinch rollers 2-1/2" OD
• 2 machined idler rollers 4-1/4" OD with 1" bearings
• Rubber-covered contact roller 5-1/4" OD with 1-5/8" drive bearing
• Conveyor table set on four 1" acme thread jackscrews
• 2 height adjustment indicators
• 6" internal dust chute
• 5 emergency stops
• 3 year warranty
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Downloads
Specifications
| Box Quantity | 1 |
| Product Type | Wide Belt Sander |
| Voltage | 208V/230V |
| Belt Size | 43" x 75" |
| Phase | 3 |
| Drive Motor | 20HP |
| Horsepower | |
| Feed Motor Power (HP) | |
| Sanding Belt Speed (FPM) | |
| Drum Diameter (In.) | |
| Minimum Board Thickness (In.) | |
| Style (Type) | |
| Motor Power (HP) | |
| Motor Phase | |
| Table Lift Motor Power | |
| Table Size (L x W) (In.) | |
| Sanding Belt Size (In.) | |
| Electrical Controls | |
| Table Height from Floor (In.) | |
| Maximum Board Thickness (In.) | |
| Maximum Board Width (In.) | |
| Prewired Voltage (V.) | |
| Dust Collection Minimum CFM Required (CFM) | |
| Recommended Circuit Size (Amps.) | |
| Wiring Remarks | |
| Motor Current (Amps) | |
| Dust Port Outside Diameter (In.) | |
| Air Required | |
| Table Tilt (Deg.) | |
| Motor Voltage (V.) | |
| Minimum Board Length (In.) | |
| Feed Rate (FPM) | |
| Platen Size (In.) | |
| Warranty |
