Safety Speed Hold Down Bar for C5 & H5
Item # SSH550
•Mfr # H550
Drop Ship Item
This item ships directly from the vendor. Additional freight charges may apply.
Product Details
The hold down bar keeps thin and flexible materials firmly against the machine frame for accurate, easy and safe cutting. The hold down bar features spring steel fingers with non-marring rollers to reduce vibration and flex while cutting thin materials.
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Product Type | Hold Down Bar |
| Height | |
| Material | |
| Length | |
| Width | |
| Maximum Cross Cut Length (In.) | |
| Right Side Extension Table (In.) | |
| Sliding Table Carriage Stroke | |
| Main Table Size Cast Iron Main Table Size (In.) | |
| Scoring Blade Arbor Size (In.) | |
| Motor Current (Amps) | |
| Wiring Remarks | |
| Maximum Width of Dado (In.) | |
| Dust Port Outside Diameter (In.) | |
| Prewired Voltage (V.) | |
| Style (Type) | |
| Maximum Depth of Cut (In.) | |
| Crosscut Fence Size with Extension (In.) | |
| Sliding Table Carriage Width (In.) | |
| Scoring Blade Size (In.) | |
| Scoring Motor Power | |
| Miter Fence (L x W x H) (In.) | |
| Motor Voltage (V.) | |
| Scoring Blade Speed (RPM) | |
| Maximum Cut Thickness (In.) | |
| Recommended Circuit Size (Amps.) | |
| Rear Extension Table Size (In.) | |
| Maximum Rip Length (In.) | |
| Blade Speed (RPM) | |
| Blade Diameter (In.) | |
| Dust Collection Minimum CFM Required (CFM) | |
| Crosscut Table Size (In.) | |
| Motor Power (HP) | |
| Main and Scoring Blade Tilt (Deg.) | |
| Motor Phase | |
| Size (In.) | |
| Arbor Diameter (In.) | |
| Warranty |
Item # SSH550
•Mfr # H550
Drop Ship Item
This item ships directly from the vendor. Additional freight charges may apply.
Product Details
The hold down bar keeps thin and flexible materials firmly against the machine frame for accurate, easy and safe cutting. The hold down bar features spring steel fingers with non-marring rollers to reduce vibration and flex while cutting thin materials.
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Product Type | Hold Down Bar |
| Height | |
| Material | |
| Length | |
| Width | |
| Maximum Cross Cut Length (In.) | |
| Right Side Extension Table (In.) | |
| Sliding Table Carriage Stroke | |
| Main Table Size Cast Iron Main Table Size (In.) | |
| Scoring Blade Arbor Size (In.) | |
| Motor Current (Amps) | |
| Wiring Remarks | |
| Maximum Width of Dado (In.) | |
| Dust Port Outside Diameter (In.) | |
| Prewired Voltage (V.) | |
| Style (Type) | |
| Maximum Depth of Cut (In.) | |
| Crosscut Fence Size with Extension (In.) | |
| Sliding Table Carriage Width (In.) | |
| Scoring Blade Size (In.) | |
| Scoring Motor Power | |
| Miter Fence (L x W x H) (In.) | |
| Motor Voltage (V.) | |
| Scoring Blade Speed (RPM) | |
| Maximum Cut Thickness (In.) | |
| Recommended Circuit Size (Amps.) | |
| Rear Extension Table Size (In.) | |
| Maximum Rip Length (In.) | |
| Blade Speed (RPM) | |
| Blade Diameter (In.) | |
| Dust Collection Minimum CFM Required (CFM) | |
| Crosscut Table Size (In.) | |
| Motor Power (HP) | |
| Main and Scoring Blade Tilt (Deg.) | |
| Motor Phase | |
| Size (In.) | |
| Arbor Diameter (In.) | |
| Warranty |