Minimax 3-Phase 10Hp Tilting 1.25 Interchangeable Spindle Shaper w/sliding mechanism
Drop Ship Item
This item ships directly from the vendor. Additional freight charges may apply.
This item may incur additional shipping costs and lead times.
Product Details
The right spindle molder for demanding craftsmen and carpentries, thanks to its customization and flexibility. This 4-speed heavy duty machine is standard with both a sliding table and tilt. The slider has hardened steel guide ways and precision bearings, so it incorporates the exact technology found in our top selling sliding table saws. The hood has memory pins so if removed, it will go right back into the same position, making this shaper accurate and repeatable. Maximum stability and rigidity in every working condition thanks to a big cast iron spindle molder unit and a sturdy base in single-block steel. Great versatility with the spindle molder with 4 speeds and available in fixed or tilting version. Best support in all machining's, thanks to the 330mm width sliding table. Advantages: • Maximum stability and rigidity in all working conditions, thanks to a large spindle molder column made entirely of cast iron • The 4 standard speed are ideal for any type of machining, from molding to routing and tenoning, with the possibility to fit tools up to 320 mm of diameter (300 mm no CE) • Spindle molder hood that uses a system for adjusting the guides with a rack and it is fitted with a mechanical digital readout • Optimal support also to larger pieces, with the new sliding table 360mm wide • Exceptional precision and smoothness: To secure the guides it is not used glue, since the thickness could affect sliding Machine Specs: Maximum useful spindle length: 125mm Spindle molder speed: 3500/6000/8000/10000 RPM Maximum tool diameter when profiling: 210mm - 240mm Maximum tool diameter lowered under the table at 90°: 240mm Maximum tool diameter when tenoning mm / inches 320 / 11.81 Three-phase motor: 10HP
Specifications
| Product Type | Spindle Shaper |
| Power | 230V |
| Phase | 3 |
| Length | |
| Width | |
| Height | |
| Horsepower | 10HP |
| Rangeof Speeds | 3500/6000/8000/10,000 RPM |
| Electrical Controls | |
| Table Inserts (In.) | |
| Reversible | |
| Spindle Size Under Nut (In.) | |
| Recommended Circuit Size (Amps.) | |
| Table Travel (In.) | |
| Maximum Diameter Cutter Above Table (In.) | |
| Wiring Remarks | |
| Table Opening | |
| Maximum Diameter Cutter Below Table (In.) | |
| Motor Phase | |
| Router Bit Collet Included | |
| Dust Collection Minimum CFM Required (CFM) | |
| Fence Travel (Major and Minor) (In.) | |
| Spindle Stroke | |
| Motor Voltage (V.) | |
| Table Size (In.) | |
| Fence Size (L x H) (In.) | |
| Dust Port Outside Diameter (In.) | |
| Motor Current (Amps) | |
| Maximum Spindle Diameter (In.) | |
| Style (Type) | |
| Spindle Pivot | |
| Spindle Travel (In.) | |
| Digital Readouts | |
| Prewired Voltage (V.) | |
| Table T-Slot (In.) | |
| Spindles Included | |
| Sliding Table Size (In.) | |
| Motor Power | |
| Table Insert Opening Diameter (In.) | |
| Table Height from Floor (In.) | |
| Warranty | |
| Control | |
| Control Panel | |
| Rotational Speeds | |
| Display Resolution | |
| Repeat Accuracy | |
| Extraction Connections | |
| Drive Motor | |
| Range of Speeds | 3500/6000/8000/10,000 RPM |
Drop Ship Item
This item ships directly from the vendor. Additional freight charges may apply.
This item may incur additional shipping costs and lead times.
Product Details
The right spindle molder for demanding craftsmen and carpentries, thanks to its customization and flexibility. This 4-speed heavy duty machine is standard with both a sliding table and tilt. The slider has hardened steel guide ways and precision bearings, so it incorporates the exact technology found in our top selling sliding table saws. The hood has memory pins so if removed, it will go right back into the same position, making this shaper accurate and repeatable. Maximum stability and rigidity in every working condition thanks to a big cast iron spindle molder unit and a sturdy base in single-block steel. Great versatility with the spindle molder with 4 speeds and available in fixed or tilting version. Best support in all machining's, thanks to the 330mm width sliding table. Advantages: • Maximum stability and rigidity in all working conditions, thanks to a large spindle molder column made entirely of cast iron • The 4 standard speed are ideal for any type of machining, from molding to routing and tenoning, with the possibility to fit tools up to 320 mm of diameter (300 mm no CE) • Spindle molder hood that uses a system for adjusting the guides with a rack and it is fitted with a mechanical digital readout • Optimal support also to larger pieces, with the new sliding table 360mm wide • Exceptional precision and smoothness: To secure the guides it is not used glue, since the thickness could affect sliding Machine Specs: Maximum useful spindle length: 125mm Spindle molder speed: 3500/6000/8000/10000 RPM Maximum tool diameter when profiling: 210mm - 240mm Maximum tool diameter lowered under the table at 90°: 240mm Maximum tool diameter when tenoning mm / inches 320 / 11.81 Three-phase motor: 10HP
Specifications
| Product Type | Spindle Shaper |
| Power | 230V |
| Phase | 3 |
| Length | |
| Width | |
| Height | |
| Horsepower | 10HP |
| Rangeof Speeds | 3500/6000/8000/10,000 RPM |
| Electrical Controls | |
| Table Inserts (In.) | |
| Reversible | |
| Spindle Size Under Nut (In.) | |
| Recommended Circuit Size (Amps.) | |
| Table Travel (In.) | |
| Maximum Diameter Cutter Above Table (In.) | |
| Wiring Remarks | |
| Table Opening | |
| Maximum Diameter Cutter Below Table (In.) | |
| Motor Phase | |
| Router Bit Collet Included | |
| Dust Collection Minimum CFM Required (CFM) | |
| Fence Travel (Major and Minor) (In.) | |
| Spindle Stroke | |
| Motor Voltage (V.) | |
| Table Size (In.) | |
| Fence Size (L x H) (In.) | |
| Dust Port Outside Diameter (In.) | |
| Motor Current (Amps) | |
| Maximum Spindle Diameter (In.) | |
| Style (Type) | |
| Spindle Pivot | |
| Spindle Travel (In.) | |
| Digital Readouts | |
| Prewired Voltage (V.) | |
| Table T-Slot (In.) | |
| Spindles Included | |
| Sliding Table Size (In.) | |
| Motor Power | |
| Table Insert Opening Diameter (In.) | |
| Table Height from Floor (In.) | |
| Warranty | |
| Control | |
| Control Panel | |
| Rotational Speeds | |
| Display Resolution | |
| Repeat Accuracy | |
| Extraction Connections | |
| Drive Motor | |
| Range of Speeds | 3500/6000/8000/10,000 RPM |