Cantek CM626 26" Single Surface Heavy Duty Planer 20HP Three Phase
Item # CANCM626
•Mfr # CANCM626-230-3
$22,700.00
/Each
Freight: $995.00
Min Order: 1
Qty mult. by: 1
This item may incur additional shipping costs and lead times.
Product Details
- Spiral cutterhead with 6 rows insert knives provides high removal, superior finish and low noise
- Solid cast iron construction
- Variable feed speed
- Drive top and bottom feed rolls
- Front & rear bed rollers easily adjusted from the front of the machine
- Power table elevation by digital thickness control
- Section infeed roll and section chipbreaker
- Anti-kickback fingers for added safety
- Dual heavy jack screws with slides for accuracy & rigidity
- Dust exhaust outlet (6″)
- Sound dampening machine cover
- All operations on convenient control panel
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Box Quantity | 1 |
| Cutter Head Diameter | 4-3/4" |
| Motor Voltage | |
| Height | |
| Power | |
| Horsepower | 20HP |
| Phase | 3 |
| Length | |
| Drive Motor | |
| Voltage | 230V/460V |
| Width | 26" |
| Cutter Head Type | Spiral |
| Motor Phase | |
| Product Type | Planer |
| Cutting Width | |
| Infeed Roller Diameter (In.) | |
| Cutter Block Diameter | |
| Speed | |
| Recommended Circuit Size (Amps.) | |
| Maximum Depth of Cut (In.) | |
| Number of Rollers | |
| Maximum Planing Width (In.) | |
| Motor Voltage (V.) | |
| Column Diameter (In.) | |
| Cuts Per Minute | |
| Reversible | |
| Maximum Full Width Depth of Cut (In.) | |
| Motor Current (Amps) | |
| Movement - Horizontal (In.) | |
| Wiring Remarks | |
| Prewired Voltage (V.) | |
| Feed Rate | |
| Table Height from Floor (In.) | |
| Outfeed Table Length (In.) | |
| Table Size (L x W) (In.) | |
| Dust Collection Minimum CFM Required (CFM) | |
| Distance Between Rollers - Center to Center (In.) | |
| Number of Speeds | |
| Knife Size (L x W x T) | |
| Table Size with Extensions (L x W) (In.) | |
| Number of Knives | |
| Segmented Infeed Roller Diameter (In.) | |
| Maximum Height of Rollers Parallel to Tabletop (In.) | |
| Bed Rollers Adjustable from Front | |
| Digital Readout | |
| Type of Cutterhead | |
| Style (Type) | |
| Range of Speeds | |
| Outfeed Roller Diameter (In.) | |
| Maximum Planing Thickness (In.) | |
| Table Support | |
| Motor Power | |
| Movement - Vertical (In.) | |
| Minimum Planing Length (In.) | |
| Cutter Block Speed | |
| Dust Port Outside Diameter (In.) | |
| Warranty | |
| Planing Height | |
| Planing Width | |
| Chip Removal | |
| Extraction Connection |
Item # CANCM626
•Mfr # CANCM626-230-3
$22,700.00
/Each
Freight: $995.00
Min Order: 1
Qty mult. by: 1
This item may incur additional shipping costs and lead times.
Product Details
- Spiral cutterhead with 6 rows insert knives provides high removal, superior finish and low noise
- Solid cast iron construction
- Variable feed speed
- Drive top and bottom feed rolls
- Front & rear bed rollers easily adjusted from the front of the machine
- Power table elevation by digital thickness control
- Section infeed roll and section chipbreaker
- Anti-kickback fingers for added safety
- Dual heavy jack screws with slides for accuracy & rigidity
- Dust exhaust outlet (6″)
- Sound dampening machine cover
- All operations on convenient control panel
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Box Quantity | 1 |
| Cutter Head Diameter | 4-3/4" |
| Motor Voltage | |
| Height | |
| Power | |
| Horsepower | 20HP |
| Phase | 3 |
| Length | |
| Drive Motor | |
| Voltage | 230V/460V |
| Width | 26" |
| Cutter Head Type | Spiral |
| Motor Phase | |
| Product Type | Planer |
| Cutting Width | |
| Infeed Roller Diameter (In.) | |
| Cutter Block Diameter | |
| Speed | |
| Recommended Circuit Size (Amps.) | |
| Maximum Depth of Cut (In.) | |
| Number of Rollers | |
| Maximum Planing Width (In.) | |
| Motor Voltage (V.) | |
| Column Diameter (In.) | |
| Cuts Per Minute | |
| Reversible | |
| Maximum Full Width Depth of Cut (In.) | |
| Motor Current (Amps) | |
| Movement - Horizontal (In.) | |
| Wiring Remarks | |
| Prewired Voltage (V.) | |
| Feed Rate | |
| Table Height from Floor (In.) | |
| Outfeed Table Length (In.) | |
| Table Size (L x W) (In.) | |
| Dust Collection Minimum CFM Required (CFM) | |
| Distance Between Rollers - Center to Center (In.) | |
| Number of Speeds | |
| Knife Size (L x W x T) | |
| Table Size with Extensions (L x W) (In.) | |
| Number of Knives | |
| Segmented Infeed Roller Diameter (In.) | |
| Maximum Height of Rollers Parallel to Tabletop (In.) | |
| Bed Rollers Adjustable from Front | |
| Digital Readout | |
| Type of Cutterhead | |
| Style (Type) | |
| Range of Speeds | |
| Outfeed Roller Diameter (In.) | |
| Maximum Planing Thickness (In.) | |
| Table Support | |
| Motor Power | |
| Movement - Vertical (In.) | |
| Minimum Planing Length (In.) | |
| Cutter Block Speed | |
| Dust Port Outside Diameter (In.) | |
| Warranty | |
| Planing Height | |
| Planing Width | |
| Chip Removal | |
| Extraction Connection |