Cantek C2511 25" Single Head Widebelt Sander Single Phase
Item # CANC2511
•Mfr # CASC251-230-1
$12,000.00
/Each
Freight: $998.00
Min Order: 1
Qty mult. by: 1
This item may incur additional shipping costs and lead times.
Product Details
- Combination head with 3-3/8″ diameter drum & 2″ wide platen
- Abrasive belt mistrack limit switches
- Centralized control panel
- Disc brake on main motor
- Double infeed & outfeed holddown rolls
- Emergency stop system including infeed pinch point protection
- Hour meter records actual running time of the machine
- Interlocks located on all access doors
- Motorized thickness adjustment with two precision jacks
- Infra-red through-beam abrasive belt tracking – “Send & Receive” type
- Quick release outboard support
- Ammeter for load monitoring
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Downloads
Specifications
| Box Quantity | 1 |
| Product Type | Belt Sander |
| Voltage | 230V |
| Belt Size | 25" x 60" |
| Phase | 1 |
| Drive Motor | 10HP |
| Horsepower | 10HP |
| Feed Motor Power (HP) | |
| Sanding Belt Speed (FPM) | |
| Drum Diameter (In.) | |
| Minimum Board Thickness (In.) | |
| Style (Type) | |
| Motor Power (HP) | |
| Motor Phase | |
| Table Lift Motor Power | |
| Table Size (L x W) (In.) | |
| Sanding Belt Size (In.) | |
| Electrical Controls | |
| Table Height from Floor (In.) | |
| Maximum Board Thickness (In.) | |
| Maximum Board Width (In.) | |
| Prewired Voltage (V.) | |
| Dust Collection Minimum CFM Required (CFM) | |
| Recommended Circuit Size (Amps.) | |
| Wiring Remarks | |
| Motor Current (Amps) | |
| Dust Port Outside Diameter (In.) | |
| Air Required | |
| Table Tilt (Deg.) | |
| Motor Voltage (V.) | |
| Minimum Board Length (In.) | |
| Feed Rate (FPM) | |
| Platen Size (In.) | |
| Warranty |
Item # CANC2511
•Mfr # CASC251-230-1
$12,000.00
/Each
Freight: $998.00
Min Order: 1
Qty mult. by: 1
This item may incur additional shipping costs and lead times.
Product Details
- Combination head with 3-3/8″ diameter drum & 2″ wide platen
- Abrasive belt mistrack limit switches
- Centralized control panel
- Disc brake on main motor
- Double infeed & outfeed holddown rolls
- Emergency stop system including infeed pinch point protection
- Hour meter records actual running time of the machine
- Interlocks located on all access doors
- Motorized thickness adjustment with two precision jacks
- Infra-red through-beam abrasive belt tracking – “Send & Receive” type
- Quick release outboard support
- Ammeter for load monitoring
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Downloads
Specifications
| Box Quantity | 1 |
| Product Type | Belt Sander |
| Voltage | 230V |
| Belt Size | 25" x 60" |
| Phase | 1 |
| Drive Motor | 10HP |
| Horsepower | 10HP |
| Feed Motor Power (HP) | |
| Sanding Belt Speed (FPM) | |
| Drum Diameter (In.) | |
| Minimum Board Thickness (In.) | |
| Style (Type) | |
| Motor Power (HP) | |
| Motor Phase | |
| Table Lift Motor Power | |
| Table Size (L x W) (In.) | |
| Sanding Belt Size (In.) | |
| Electrical Controls | |
| Table Height from Floor (In.) | |
| Maximum Board Thickness (In.) | |
| Maximum Board Width (In.) | |
| Prewired Voltage (V.) | |
| Dust Collection Minimum CFM Required (CFM) | |
| Recommended Circuit Size (Amps.) | |
| Wiring Remarks | |
| Motor Current (Amps) | |
| Dust Port Outside Diameter (In.) | |
| Air Required | |
| Table Tilt (Deg.) | |
| Motor Voltage (V.) | |
| Minimum Board Length (In.) | |
| Feed Rate (FPM) | |
| Platen Size (In.) | |
| Warranty |