Cantek SS512CB 5 Speed Spindle Shaper 7.5HP Three Phase
Item # CANSS512CB
•Mfr # CANSS512CB-230-3
$9,200.00
/Each
Freight: $795.00
Min Order: 1
Qty mult. by: 1
This item may incur additional shipping costs and lead times.
Product Details
- Powerful 7.5 HP spindle
- Includes (1) 1 1/4″ interchangeable spindle (other spindle diamters available upon request)
- Cast iron ground & polished table with insert rings
- Precision ground & electronically balanced spindle
- Micro spindle height adjustment with dial indicator
- Forward/reverse spindle rotation
- V-belt drive with 5 feed speeds is easily accessed from the front of the machine
- Electric spindle brake for added safety
- Spindle lock – with limit switch safety, machine will not start with lock engaged
- Adjustable “finger” type fence for adjust
- Independent micro-fence adjustment on both sides
- Table is pre-drilled to mount a power feeder
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Downloads
Specifications
| Box Quantity | 1 |
| Product Type | Spindle Shaper |
| Power | 230V |
| Phase | 3 |
| Length | 48-1/2" |
| Width | 39-13/32" |
| Height | 52-3/4" |
| Horsepower | 7.5 HP |
| Rangeof Speeds | 3000/4500/6000/8000/10000 RPM |
| Electrical Controls | |
| Table Inserts (In.) | |
| Reversible | |
| Spindle Size Under Nut (In.) | |
| Recommended Circuit Size (Amps.) | |
| Table Travel (In.) | |
| Maximum Diameter Cutter Above Table (In.) | |
| Wiring Remarks | |
| Table Opening | |
| Maximum Diameter Cutter Below Table (In.) | |
| Motor Phase | |
| Router Bit Collet Included | |
| Dust Collection Minimum CFM Required (CFM) | |
| Fence Travel (Major and Minor) (In.) | |
| Spindle Stroke | |
| Motor Voltage (V.) | |
| Table Size (In.) | |
| Fence Size (L x H) (In.) | |
| Dust Port Outside Diameter (In.) | |
| Motor Current (Amps) | |
| Maximum Spindle Diameter (In.) | |
| Style (Type) | |
| Spindle Pivot | |
| Spindle Travel (In.) | |
| Digital Readouts | |
| Prewired Voltage (V.) | |
| Table T-Slot (In.) | |
| Spindles Included | |
| Sliding Table Size (In.) | |
| Motor Power | |
| Table Insert Opening Diameter (In.) | |
| Table Height from Floor (In.) | |
| Warranty | |
| Control | |
| Control Panel | |
| Rotational Speeds | |
| Display Resolution | |
| Repeat Accuracy | |
| Extraction Connections | |
| Drive Motor | |
| Range of Speeds | 3000/4500/6000/8000/10000 RPM |
Item # CANSS512CB
•Mfr # CANSS512CB-230-3
$9,200.00
/Each
Freight: $795.00
Min Order: 1
Qty mult. by: 1
This item may incur additional shipping costs and lead times.
Product Details
- Powerful 7.5 HP spindle
- Includes (1) 1 1/4″ interchangeable spindle (other spindle diamters available upon request)
- Cast iron ground & polished table with insert rings
- Precision ground & electronically balanced spindle
- Micro spindle height adjustment with dial indicator
- Forward/reverse spindle rotation
- V-belt drive with 5 feed speeds is easily accessed from the front of the machine
- Electric spindle brake for added safety
- Spindle lock – with limit switch safety, machine will not start with lock engaged
- Adjustable “finger” type fence for adjust
- Independent micro-fence adjustment on both sides
- Table is pre-drilled to mount a power feeder
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Downloads
Specifications
| Box Quantity | 1 |
| Product Type | Spindle Shaper |
| Power | 230V |
| Phase | 3 |
| Length | 48-1/2" |
| Width | 39-13/32" |
| Height | 52-3/4" |
| Horsepower | 7.5 HP |
| Rangeof Speeds | 3000/4500/6000/8000/10000 RPM |
| Electrical Controls | |
| Table Inserts (In.) | |
| Reversible | |
| Spindle Size Under Nut (In.) | |
| Recommended Circuit Size (Amps.) | |
| Table Travel (In.) | |
| Maximum Diameter Cutter Above Table (In.) | |
| Wiring Remarks | |
| Table Opening | |
| Maximum Diameter Cutter Below Table (In.) | |
| Motor Phase | |
| Router Bit Collet Included | |
| Dust Collection Minimum CFM Required (CFM) | |
| Fence Travel (Major and Minor) (In.) | |
| Spindle Stroke | |
| Motor Voltage (V.) | |
| Table Size (In.) | |
| Fence Size (L x H) (In.) | |
| Dust Port Outside Diameter (In.) | |
| Motor Current (Amps) | |
| Maximum Spindle Diameter (In.) | |
| Style (Type) | |
| Spindle Pivot | |
| Spindle Travel (In.) | |
| Digital Readouts | |
| Prewired Voltage (V.) | |
| Table T-Slot (In.) | |
| Spindles Included | |
| Sliding Table Size (In.) | |
| Motor Power | |
| Table Insert Opening Diameter (In.) | |
| Table Height from Floor (In.) | |
| Warranty | |
| Control | |
| Control Panel | |
| Rotational Speeds | |
| Display Resolution | |
| Repeat Accuracy | |
| Extraction Connections | |
| Drive Motor | |
| Range of Speeds | 3000/4500/6000/8000/10000 RPM |