Jet Tools 708309 JWS-25X Jet Shaper 3HP Single Phase 230V
Drop Ship Item
This item ships directly from the vendor. Additional freight charges may apply.
This item may incur additional shipping costs and lead times.
Product Details
The new model JWS-25X Shaper features a powerful 3HP motor with magnetic controls. The large 25”x 25-1/2” precision ground cast iron table provides plenty of support. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independently adjustable left and right fence has a built in 4” dust port.
Features
- 4” Dust port built into fence for convenient hookup to any dust collection system
- Extra large chrome handwheel is conveniently located for fast, easy and accurate spindle height adjustments
- Extruded aluminum fence comes with T-Slots and 2 feather board hold-downs
- Independently adjustable left and right fences, standard with a micro adjust control for precise positioning
- Large 25” X 25-1/2” precision ground cast iron table provides a durable work area
- Powerful 3HP, 1Ph motor with magnetic controls
- Reversible spindle speeds for diverse shaping jobs
- Spindle lock for safe and easy cutter set up
- Starting Pins for irregular shaping
- Two-speeds let you select the best speed and torque for different cutter diameters
- V-belt transfers maximum power to the spindle
Specifications
Spindle Travel (In.) - 3-1/2
Table Size (L x W) (In.) - 25-1/2 x 25
Table Opening Diameter (In.) - 6-9/32
Table Inserts (In.) - 2
Motor Power (HP) - 3
Table Height from Floor (In.) - 33
Dust Collection Minimum CFM Required (CFM) - 600
Dust Port Outside Diameter (In.) - 4
Motor Voltage (V.) - 230
Prewired Voltage (V.) - 230
Motor Amps - 16
Recommended Circuit Size (Amps.) - 30
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Box Quantity | 1 |
| Product Type | Shaper |
| Power | |
| Phase | 1 |
| Length | |
| Width | |
| Height | |
| Horsepower | 3 HP |
| Rangeof Speeds | |
| Electrical Controls | |
| Table Inserts (In.) | |
| Reversible | |
| Spindle Size Under Nut (In.) | |
| Recommended Circuit Size (Amps.) | |
| Table Travel (In.) | |
| Maximum Diameter Cutter Above Table (In.) | |
| Wiring Remarks | |
| Table Opening | |
| Maximum Diameter Cutter Below Table (In.) | |
| Motor Phase | |
| Router Bit Collet Included | |
| Dust Collection Minimum CFM Required (CFM) | |
| Fence Travel (Major and Minor) (In.) | |
| Spindle Stroke | |
| Motor Voltage (V.) | |
| Table Size (In.) | |
| Fence Size (L x H) (In.) | |
| Dust Port Outside Diameter (In.) | |
| Motor Current (Amps) | |
| Maximum Spindle Diameter (In.) | |
| Style (Type) | |
| Spindle Pivot | |
| Spindle Travel (In.) | |
| Digital Readouts | |
| Prewired Voltage (V.) | |
| Table T-Slot (In.) | |
| Spindles Included | |
| Sliding Table Size (In.) | |
| Motor Power | |
| Table Insert Opening Diameter (In.) | |
| Table Height from Floor (In.) | |
| Warranty | |
| Control | |
| Control Panel | |
| Rotational Speeds | |
| Display Resolution | |
| Repeat Accuracy | |
| Extraction Connections | |
| Drive Motor | |
| Range of Speeds |
Drop Ship Item
This item ships directly from the vendor. Additional freight charges may apply.
This item may incur additional shipping costs and lead times.
Product Details
The new model JWS-25X Shaper features a powerful 3HP motor with magnetic controls. The large 25”x 25-1/2” precision ground cast iron table provides plenty of support. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independently adjustable left and right fence has a built in 4” dust port.
Features
- 4” Dust port built into fence for convenient hookup to any dust collection system
- Extra large chrome handwheel is conveniently located for fast, easy and accurate spindle height adjustments
- Extruded aluminum fence comes with T-Slots and 2 feather board hold-downs
- Independently adjustable left and right fences, standard with a micro adjust control for precise positioning
- Large 25” X 25-1/2” precision ground cast iron table provides a durable work area
- Powerful 3HP, 1Ph motor with magnetic controls
- Reversible spindle speeds for diverse shaping jobs
- Spindle lock for safe and easy cutter set up
- Starting Pins for irregular shaping
- Two-speeds let you select the best speed and torque for different cutter diameters
- V-belt transfers maximum power to the spindle
Specifications
Spindle Travel (In.) - 3-1/2
Table Size (L x W) (In.) - 25-1/2 x 25
Table Opening Diameter (In.) - 6-9/32
Table Inserts (In.) - 2
Motor Power (HP) - 3
Table Height from Floor (In.) - 33
Dust Collection Minimum CFM Required (CFM) - 600
Dust Port Outside Diameter (In.) - 4
Motor Voltage (V.) - 230
Prewired Voltage (V.) - 230
Motor Amps - 16
Recommended Circuit Size (Amps.) - 30
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Box Quantity | 1 |
| Product Type | Shaper |
| Power | |
| Phase | 1 |
| Length | |
| Width | |
| Height | |
| Horsepower | 3 HP |
| Rangeof Speeds | |
| Electrical Controls | |
| Table Inserts (In.) | |
| Reversible | |
| Spindle Size Under Nut (In.) | |
| Recommended Circuit Size (Amps.) | |
| Table Travel (In.) | |
| Maximum Diameter Cutter Above Table (In.) | |
| Wiring Remarks | |
| Table Opening | |
| Maximum Diameter Cutter Below Table (In.) | |
| Motor Phase | |
| Router Bit Collet Included | |
| Dust Collection Minimum CFM Required (CFM) | |
| Fence Travel (Major and Minor) (In.) | |
| Spindle Stroke | |
| Motor Voltage (V.) | |
| Table Size (In.) | |
| Fence Size (L x H) (In.) | |
| Dust Port Outside Diameter (In.) | |
| Motor Current (Amps) | |
| Maximum Spindle Diameter (In.) | |
| Style (Type) | |
| Spindle Pivot | |
| Spindle Travel (In.) | |
| Digital Readouts | |
| Prewired Voltage (V.) | |
| Table T-Slot (In.) | |
| Spindles Included | |
| Sliding Table Size (In.) | |
| Motor Power | |
| Table Insert Opening Diameter (In.) | |
| Table Height from Floor (In.) | |
| Warranty | |
| Control | |
| Control Panel | |
| Rotational Speeds | |
| Display Resolution | |
| Repeat Accuracy | |
| Extraction Connections | |
| Drive Motor | |
| Range of Speeds |