SCM DMC SD 90 RRT 135V 53" Three Head Wide Belt Automatic Steel Drum Sander
Drop Ship Item
This item ships directly from the vendor. Additional freight charges may apply.
This item may incur additional shipping costs and lead times.
Product Details
GENERAL FEATURES:
Base and working table
- steel structure with electric cabinet on the machine front
- sanding belts introduction from the machine left side
- powered adjustment of working thickness
- main motor positioned inside the base
Electrical equipment
- electromechanical keyboard positioned on the machine front side
- automatic star-delta start of the main motor
- overload protections on the motors
- motors in isolation class IP54
Emergency and safety devices
- automatic brake for rapid shutdown of the operating group
- hand-safety emergency device in the infeed panel area
- front and rear emergency pushbutton
- padlockable main switch
- automatic emergency stop machine for:
- sanding belt breaking
- not-tensioned sanding belt
- lateral outplacement of sanding belt
- absence of compressed air
- overload on main motor
Basic Machine Standard Equipment
- Electronic ammeter on main motor for readout of absorbed power
- Electronic readout of working thickness
- Electronic oscillating of sanding belts
- Rubber-coated pressure rollers
- Infeed anti-kickback vertically pivoted roller on 1st operating group
- Automatic device for feed belt tracking and tensioning
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Product Type | Wide Belt Sander |
| Voltage | |
| Belt Size | 1370mm x 2620mm |
| Phase | |
| Drive Motor | |
| Horsepower | |
| Feed Motor Power (HP) | |
| Sanding Belt Speed (FPM) | |
| Drum Diameter (In.) | |
| Minimum Board Thickness (In.) | |
| Style (Type) | |
| Motor Power (HP) | |
| Motor Phase | |
| Table Lift Motor Power | |
| Table Size (L x W) (In.) | |
| Sanding Belt Size (In.) | |
| Electrical Controls | |
| Table Height from Floor (In.) | |
| Maximum Board Thickness (In.) | |
| Maximum Board Width (In.) | |
| Prewired Voltage (V.) | |
| Dust Collection Minimum CFM Required (CFM) | |
| Recommended Circuit Size (Amps.) | |
| Wiring Remarks | |
| Motor Current (Amps) | |
| Dust Port Outside Diameter (In.) | |
| Air Required | |
| Table Tilt (Deg.) | |
| Motor Voltage (V.) | |
| Minimum Board Length (In.) | |
| Feed Rate (FPM) | |
| Platen Size (In.) | |
| Warranty |
Drop Ship Item
This item ships directly from the vendor. Additional freight charges may apply.
This item may incur additional shipping costs and lead times.
Product Details
GENERAL FEATURES:
Base and working table
- steel structure with electric cabinet on the machine front
- sanding belts introduction from the machine left side
- powered adjustment of working thickness
- main motor positioned inside the base
Electrical equipment
- electromechanical keyboard positioned on the machine front side
- automatic star-delta start of the main motor
- overload protections on the motors
- motors in isolation class IP54
Emergency and safety devices
- automatic brake for rapid shutdown of the operating group
- hand-safety emergency device in the infeed panel area
- front and rear emergency pushbutton
- padlockable main switch
- automatic emergency stop machine for:
- sanding belt breaking
- not-tensioned sanding belt
- lateral outplacement of sanding belt
- absence of compressed air
- overload on main motor
Basic Machine Standard Equipment
- Electronic ammeter on main motor for readout of absorbed power
- Electronic readout of working thickness
- Electronic oscillating of sanding belts
- Rubber-coated pressure rollers
- Infeed anti-kickback vertically pivoted roller on 1st operating group
- Automatic device for feed belt tracking and tensioning
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Product Type | Wide Belt Sander |
| Voltage | |
| Belt Size | 1370mm x 2620mm |
| Phase | |
| Drive Motor | |
| Horsepower | |
| Feed Motor Power (HP) | |
| Sanding Belt Speed (FPM) | |
| Drum Diameter (In.) | |
| Minimum Board Thickness (In.) | |
| Style (Type) | |
| Motor Power (HP) | |
| Motor Phase | |
| Table Lift Motor Power | |
| Table Size (L x W) (In.) | |
| Sanding Belt Size (In.) | |
| Electrical Controls | |
| Table Height from Floor (In.) | |
| Maximum Board Thickness (In.) | |
| Maximum Board Width (In.) | |
| Prewired Voltage (V.) | |
| Dust Collection Minimum CFM Required (CFM) | |
| Recommended Circuit Size (Amps.) | |
| Wiring Remarks | |
| Motor Current (Amps) | |
| Dust Port Outside Diameter (In.) | |
| Air Required | |
| Table Tilt (Deg.) | |
| Motor Voltage (V.) | |
| Minimum Board Length (In.) | |
| Feed Rate (FPM) | |
| Platen Size (In.) | |
| Warranty |