SCM DMC SD 60 KRCS 110 43" Wide Belt Sander 480V Three Phase
Drop Ship Item
This item ships directly from the vendor. Additional freight charges may apply.
This item may incur additional shipping costs and lead times.
Product Details
MAIN FEATURES
- LONG BELTS: 85 INCHES LENGTH FOR GREATER FINISHING AND PRODUCTIVITY
- PHOTOCELLS WITH “PRESENCE DETECTION SYSTEM” TO ENSURE ALWAYS THE CORRECT CENTERING OF THE ABRASIVE BELT
- FLOATING PRESSURE ROLLERS: PRECISE AND CORRECT WORKPIECES HOLDING IN ALL WORKING CONDITIONS
TECHNICAL DATA:
| Working Width | 1100 mm |
| Min/Max Working Thickness | 4-170 mm |
| Sanding Belt Width | 1115 mm |
| Sanding Belt Length | 2150 mm |
| 1st Unit Motor Power | 24 HP |
| 2nd Unit Motor Power | 24 HP |
| 3rd Unti Motor Power | 18 HP |
| Feed Belt Motor Power | 4 HP |
| Feed Speed | 18 mps |
GENERAL FEATURES:
Base and working table
- steel structure with electric cabinet on the machine front
- sanding belts introduction from the machine left side
- powered adjustment of working thickness
- main motor positioned inside the base
Electrical equipment
- electromechanical keyboard positioned on the machine front side
- automatic star-delta start of the main motor
- overload protections on the motors
- motors in isolation class IP54
Emergency and safety devices
- automatic brake for rapid shutdown of the operating group
- hand-safety emergency device in the infeed panel area
- front and rear emergency pushbutton
- padlockable main switch
- automatic emergency stop machine for:
- sanding belt breaking
- not-tensioned sanding belt
- lateral outplacement of sanding belt
- absence of compressed air
- overload on main motor
BASIC MACHINES STANDARD EQUIPMENT
- Electronic readout of working thickness
- Electronic oscillating of sanding belts
- Rubber-coated pressure rollers
- Infeed anti-kickback vertically pivoted roller on 1st operating group
- 60 Shore rubber feed belt
- Infeed/outfeed workpieces support rollers with two rollers
- Automatic device for feed belt tracking and tensioning
- Electronic ammeter on main motor for readout of absorbed power
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Product Type | Wide Belt Sander |
| Voltage | 480V |
| Belt Size | 1115mm x 2150mm |
| Phase | 3 |
| Drive Motor | |
| Horsepower | |
| Feed Motor Power (HP) | |
| Sanding Belt Speed (FPM) | |
| Drum Diameter (In.) | |
| Minimum Board Thickness (In.) | |
| Style (Type) | |
| Motor Power (HP) | |
| Motor Phase | |
| Table Lift Motor Power | |
| Table Size (L x W) (In.) | |
| Sanding Belt Size (In.) | |
| Electrical Controls | |
| Table Height from Floor (In.) | |
| Maximum Board Thickness (In.) | |
| Maximum Board Width (In.) | |
| Prewired Voltage (V.) | |
| Dust Collection Minimum CFM Required (CFM) | |
| Recommended Circuit Size (Amps.) | |
| Wiring Remarks | |
| Motor Current (Amps) | |
| Dust Port Outside Diameter (In.) | |
| Air Required | |
| Table Tilt (Deg.) | |
| Motor Voltage (V.) | |
| Minimum Board Length (In.) | |
| Feed Rate (FPM) | |
| Platen Size (In.) | |
| Warranty |
Drop Ship Item
This item ships directly from the vendor. Additional freight charges may apply.
This item may incur additional shipping costs and lead times.
Product Details
MAIN FEATURES
- LONG BELTS: 85 INCHES LENGTH FOR GREATER FINISHING AND PRODUCTIVITY
- PHOTOCELLS WITH “PRESENCE DETECTION SYSTEM” TO ENSURE ALWAYS THE CORRECT CENTERING OF THE ABRASIVE BELT
- FLOATING PRESSURE ROLLERS: PRECISE AND CORRECT WORKPIECES HOLDING IN ALL WORKING CONDITIONS
TECHNICAL DATA:
| Working Width | 1100 mm |
| Min/Max Working Thickness | 4-170 mm |
| Sanding Belt Width | 1115 mm |
| Sanding Belt Length | 2150 mm |
| 1st Unit Motor Power | 24 HP |
| 2nd Unit Motor Power | 24 HP |
| 3rd Unti Motor Power | 18 HP |
| Feed Belt Motor Power | 4 HP |
| Feed Speed | 18 mps |
GENERAL FEATURES:
Base and working table
- steel structure with electric cabinet on the machine front
- sanding belts introduction from the machine left side
- powered adjustment of working thickness
- main motor positioned inside the base
Electrical equipment
- electromechanical keyboard positioned on the machine front side
- automatic star-delta start of the main motor
- overload protections on the motors
- motors in isolation class IP54
Emergency and safety devices
- automatic brake for rapid shutdown of the operating group
- hand-safety emergency device in the infeed panel area
- front and rear emergency pushbutton
- padlockable main switch
- automatic emergency stop machine for:
- sanding belt breaking
- not-tensioned sanding belt
- lateral outplacement of sanding belt
- absence of compressed air
- overload on main motor
BASIC MACHINES STANDARD EQUIPMENT
- Electronic readout of working thickness
- Electronic oscillating of sanding belts
- Rubber-coated pressure rollers
- Infeed anti-kickback vertically pivoted roller on 1st operating group
- 60 Shore rubber feed belt
- Infeed/outfeed workpieces support rollers with two rollers
- Automatic device for feed belt tracking and tensioning
- Electronic ammeter on main motor for readout of absorbed power
Please be advised that product(s) you’re purchasing may have State of California Prop 65 warnings associated. For more information, go to www.P65Warnings.ca.gov
Specifications
| Product Type | Wide Belt Sander |
| Voltage | 480V |
| Belt Size | 1115mm x 2150mm |
| Phase | 3 |
| Drive Motor | |
| Horsepower | |
| Feed Motor Power (HP) | |
| Sanding Belt Speed (FPM) | |
| Drum Diameter (In.) | |
| Minimum Board Thickness (In.) | |
| Style (Type) | |
| Motor Power (HP) | |
| Motor Phase | |
| Table Lift Motor Power | |
| Table Size (L x W) (In.) | |
| Sanding Belt Size (In.) | |
| Electrical Controls | |
| Table Height from Floor (In.) | |
| Maximum Board Thickness (In.) | |
| Maximum Board Width (In.) | |
| Prewired Voltage (V.) | |
| Dust Collection Minimum CFM Required (CFM) | |
| Recommended Circuit Size (Amps.) | |
| Wiring Remarks | |
| Motor Current (Amps) | |
| Dust Port Outside Diameter (In.) | |
| Air Required | |
| Table Tilt (Deg.) | |
| Motor Voltage (V.) | |
| Minimum Board Length (In.) | |
| Feed Rate (FPM) | |
| Platen Size (In.) | |
| Warranty |