Steel Ball Bearing Guide 5/8" Overall Dia x 1/4" Inner Dia x 3/16" Height
Product Details
Features: • Steel Ball Bearing Guide 5/8" Overall Dia x 1/4" Inner Dia x 3/16" Height • Bearings are double steel-shielded for extra rigidity and to inhibit dust • A special high-performance, high-temperature grease is used for maximum life • With Teflon dust shields. Used as a substitute for 47712 for fine dust conditions • Note: Solvents should not be used to clean ball bearings, as this will deteriorate the special grease. ′Frozen′ bearings (ones that do not rotate freely), should be replaced immediately
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | |
| Application | |
| Material | |
| Product Type | Ball Bearing |
| Length | |
| Degree of Cut | |
| Shank Diameter |
Product Details
Features: • Steel Ball Bearing Guide 5/8" Overall Dia x 1/4" Inner Dia x 3/16" Height • Bearings are double steel-shielded for extra rigidity and to inhibit dust • A special high-performance, high-temperature grease is used for maximum life • With Teflon dust shields. Used as a substitute for 47712 for fine dust conditions • Note: Solvents should not be used to clean ball bearings, as this will deteriorate the special grease. ′Frozen′ bearings (ones that do not rotate freely), should be replaced immediately
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | |
| Width | |
| Cutting Diameter | |
| Application | |
| Material | |
| Product Type | Ball Bearing |
| Length | |
| Degree of Cut | |
| Shank Diameter |