1-3/8" Dia x 1/4" Carbide Tipped 45° Laminate Miter Bit, Joint Undercutter Assembly, 1/2" Shank
Product Details
Eliminate that dark line at the edge of a counter or other laminate-covered surface. With this bit assembly, the laminate cemented to the substrate can be trimmed and mitered in one pass. Then a pre-mitered edging strip can be applied. The resulting seam is clean and crisp. Not intended for use in a laminate trimmer. Features: • 1-3/8" Dia x 1/4" Carbide Tipped 45 Deg Laminate Miter Joint Undercutter Assembly, 1/2" Shank • Laminated top is ′under-cut′, as shown • Apron laminate is pre-cut at 45.° • Adhere pre-cut laminate for a perfect fit • A fine file may be used to remove the sharp edge after joining
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | 1/4" |
| Width | |
| Cutting Diameter | 1-3/8" |
| Application | |
| Material | |
| Product Type | Miter Bit |
| Length | 2-3/8" |
| Degree of Cut | 45° |
| Shank Diameter | 1/4" |
Product Details
Eliminate that dark line at the edge of a counter or other laminate-covered surface. With this bit assembly, the laminate cemented to the substrate can be trimmed and mitered in one pass. Then a pre-mitered edging strip can be applied. The resulting seam is clean and crisp. Not intended for use in a laminate trimmer. Features: • 1-3/8" Dia x 1/4" Carbide Tipped 45 Deg Laminate Miter Joint Undercutter Assembly, 1/2" Shank • Laminated top is ′under-cut′, as shown • Apron laminate is pre-cut at 45.° • Adhere pre-cut laminate for a perfect fit • A fine file may be used to remove the sharp edge after joining
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Height | 1/4" |
| Width | |
| Cutting Diameter | 1-3/8" |
| Application | |
| Material | |
| Product Type | Miter Bit |
| Length | 2-3/8" |
| Degree of Cut | 45° |
| Shank Diameter | 1/4" |