1-3/4" Dia x 1-3/16" Carbide Tipped Solid Surface Tapered Plug Cutter Repair Router Bit, Set, 1/2" Shank (2 Pieces)
Product Details
Features: • 1-3/4" Dia x 1-3/16" Carbide Tipped Solid Surface Tapered Plug Cutter Repair Router Bit Set, 1/2" Shank • Special design to repair holes, gouges and defects on top of the materials • This set was designed primarily for reparing solid surface materials. It can be used on wood as well if required • The recommended RPM is to a degree dependent on the type of equipment and the stability of the setup when cutting • Using Plunging Router: The maximum speed for using this set is 10,000 RPM. It is important to work very slowly and steadily. We recommend securing the router with clamps so the machine is fixed firmly in place • Using Drill Press: When working on a drill press we recommend speed of 2,000 to 3,000 RPM. Here it is important that the work is firmly clamped to ensure stability • Cutting Height (B1): 1-3/16" • Cutting Height (B2): 1"
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Length | 3-1/16" |
| Product Type | Plug Cutter |
| Cutting Diameter | 1-3/4" |
| Shank Diameter | 1/2" |
| Material |
Product Details
Features: • 1-3/4" Dia x 1-3/16" Carbide Tipped Solid Surface Tapered Plug Cutter Repair Router Bit Set, 1/2" Shank • Special design to repair holes, gouges and defects on top of the materials • This set was designed primarily for reparing solid surface materials. It can be used on wood as well if required • The recommended RPM is to a degree dependent on the type of equipment and the stability of the setup when cutting • Using Plunging Router: The maximum speed for using this set is 10,000 RPM. It is important to work very slowly and steadily. We recommend securing the router with clamps so the machine is fixed firmly in place • Using Drill Press: When working on a drill press we recommend speed of 2,000 to 3,000 RPM. Here it is important that the work is firmly clamped to ensure stability • Cutting Height (B1): 1-3/16" • Cutting Height (B2): 1"
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood
Specifications
| Box Quantity | 1 |
| Length | 3-1/16" |
| Product Type | Plug Cutter |
| Cutting Diameter | 1-3/4" |
| Shank Diameter | 1/2" |
| Material |
