Saviola High Pressure Laminate for Straight-Grain Wood-Look Surfaces
Prague Rift is a Saviola collection HPL sheet in a tight, linear rift-cut wood grain with a Chandler finish, sized at 73 inches by 120 inches and 0.9 mm thick. This is the companion HPL sheet to the Saviola decorative panel program, letting fabricators carry the Prague Rift decor onto countertops, work surfaces, and vertical components that fall outside standard panel dimensions.
Key Features
- Prague Rift decor with Chandler finish — a straight, tight rift-cut wood grain that reads linear and contemporary across a flat surface.
- 73 inch by 120 inch sheet — a large-format size that reduces seams on wide countertops and full-height vertical panels.
- 0.9 mm thickness — the standard HPL gauge for post-forming, bonding to substrate, and high-wear horizontal and vertical work.
- High pressure laminate construction — a separately manufactured sheet bonded by the fabricator, not a thermally fused face, so it goes down on any prepared substrate.
- Saviola collection matching — coordinates with Saviola TFL panels in Prague Rift for a continuous decor across panels and applied surfaces.
Where Prague Rift HPL Fits the Job
A rift-cut wood grain is the right call when the design calls for a linear, even pattern without the cathedral arches of flat-sawn or the ray fleck of quarter-sawn. Prague Rift delivers that on a countertop, a reception desk surface, a retail fixture top, or a wall panel run where the grain needs to travel horizontally without breaking into figure. The 73 by 120 inch sheet covers a long countertop in a single piece, or a full-height wall section without a mid-run seam. Fabricators specifying the Saviola TFL panel for cabinet boxes and doors can pull this HPL sheet to match on the horizontal surfaces the panel program does not reach.
Construction and Material
High pressure laminate is manufactured as an independent sheet, consolidated from kraft paper layers and a decorative surface paper under high pressure, then bonded to a prepared substrate by the fabricator. That construction separates it from thermally fused laminate, which bonds at the panel mill. The 0.9 mm gauge is the workhorse thickness for post-forming and flat-lay work: substantial enough to handle without delaminating at the edge, thin enough to post-form over a radius on a countertop nose. The Chandler finish gives the Prague Rift decor a surface character suited to surfaces that take daily contact.
Who Orders This Sheet
Cabinet shops running Saviola Prague Rift TFL panels reach for this HPL sheet when the job includes a countertop, a floating shelf, or a tall wall panel that the TFL sheet size does not cover. Millwork fabricators use it on reception desks, retail fixtures, and commercial casework where a specified wood-look surface needs to hold up under sustained use. Designers who have written Prague Rift into a specification can rely on this sheet to carry the same decor off the cabinet face and onto adjacent horizontal or vertical work without a color break.
Is this sheet the same color as the Saviola Prague Rift TFL panel?
Yes. This HPL sheet is the matching companion to the Saviola Prague Rift decorative panel, produced in the same decor so the color reads continuously across bonded and thermally fused surfaces on the same project.
Does this sheet require a specific adhesive or substrate?
HPL is bonded by the fabricator to a prepared substrate — particleboard, MDF, or plywood — using contact cement or a press bond. Standard HPL bonding practice applies; no special adhesive is required beyond what the application and substrate call for.
Can this sheet be post-formed over a countertop radius?
At 0.9 mm, this sheet is within the standard gauge range for post-forming. Minimum bend radius depends on the post-forming equipment and the substrate profile, so confirm the radius against your machinery before cutting.
Is matching edgebanding available for this color?
Matching ABS edgebanding is available in the Saviola collection for Prague Rift. Check the edgebanding listings for this color to confirm current width and roll-length options.
One Decor, Every Surface
Prague Rift in HPL means the rift-cut grain stays consistent whether it lands on a cabinet door, a countertop, or a full-height wall panel — so the whole job reads as a single, resolved design rather than a close-but-not-quite approximation.
