PRO PET ABS Edgebanding For Clean, Matte White Casework Edges
This is the matching ABS edgebanding for the SALT International PRO PET collection in color SLTPRO0036 Bianco Opaco, a warm, non-reflective white with a super matte surface. At 23 mm wide and 1 mm thick, it is sized to trim flush on standard 19 mm panels and arrives on a 246-foot production roll ready for an automatic edgebander.
Key Features
- Matched to PRO PET SLTPRO0036 Bianco Opaco so the edge reads as a continuous surface against the panel face.
- Super matte finish absorbs light and keeps the edge consistent with the low-gloss character of the panel program.
- ABS polymer construction is chlorine-free, clearing specifications that restrict PVC in commercial and healthcare environments.
- 1 mm thickness provides a durable, impact-resistant edge profile that trims and sands cleanly.
- 23 mm width gives enough overhang on a 19 mm panel to clean up both faces flush after bonding.
- 246-foot production roll suits cabinet shops running this color across a full job or maintaining a stocking roll.
Where This Edgebanding Works Best
Bianco Opaco is a matte, clean white that reads as contemporary rather than stark. It suits handleless kitchen and bath cabinetry where a flat, consistent surface across the face and edge is the design intent. The super matte finish means the edge does not catch light differently from the panel face, which matters on tall door runs and large drawer fronts where any sheen mismatch becomes visible under overhead lighting. It is also a common choice for closet systems and open shelving in residential work where the white tone needs to hold up over repeated handling without showing fingerprints or gloss build-up at the edge.
Material and Performance
ABS edgebanding is the standard polymer choice for European decorative panel programs, and it is the material SALT International uses across the PRO PET edgebanding line. Because ABS is chlorine-free, it works in commercial specifications and green building projects where PVC is restricted. The 1 mm caliper gives the edge enough body to resist impact and chip-back at corners without adding visible bulk to a square-edge profile. The super matte surface of this color is consistent with the PET foil face on the panel, so color and sheen arrive matched from the factory rather than approximated at the job.
Who Orders This Roll
Cabinet shops running PRO PET panels in Bianco Opaco keep this roll on the edgebander to close out cut edges without a separate color-match step. The 246-foot length is a production quantity suited to shops that use this color regularly or are running a full kitchen or bath job. Designers and millwork contractors specifying the PRO PET collection for commercial interiors appreciate the ABS material story when a chlorine-free edge is part of the submittal. For a single-cabinet repair or a sample run, the 246-foot roll is the available format in this width for PRO PET edgebanding.
Does this edgebanding require a specific adhesive or machine setting?
ABS banding runs on standard hot-melt edgebanders with EVA or PUR glue. Follow your machine manufacturer's temperature setting for 1 mm ABS. PUR adhesive gives a stronger glue line and is the preferred choice for bath and kitchen environments where steam and humidity are present.
Is Bianco Opaco a true white or does it read warm or cool?
SLTPRO0036 Bianco Opaco is a soft, slightly warm white with a super matte finish. It is not a bright optical white. Order a sample alongside the PRO PET panel in the same color before finalizing a specification if exact tone matching is critical to the job.
Can this banding be used on panel thicknesses other than 19 mm?
At 23 mm wide, this roll provides overhang on panels up to approximately 19 mm thick. It can be applied to thinner panels with more trimming, but it is not the right width for panels thicker than 19 mm. For thicker substrates, check whether a wider banding width is available in this color.
Is matching HPL available in SLTPRO0036 Bianco Opaco to carry the color onto a countertop?
Matching high-pressure laminate is not part of the PRO PET program. If the job requires the Bianco Opaco color on a horizontal surface, the PRO PET panel itself or a field-applied solution would need to be evaluated separately.
The Right Edge for a Matte White Job
When the panel program is PRO PET Bianco Opaco, this roll closes every cut edge with a finish and color the panel face was designed to meet, so the work leaves the shop looking complete.
