Super Matte Tone And A Perfect Match For Beige Opaco Panels
This is the factory-matched ABS edgebanding for SALT International's PRO PET Beige Opaco decorative panels, produced in the same color and finish so the cut edge reads as part of the panel rather than an afterthought. The 23 mm wide strip is sized for 19 mm panels and trims flush on both faces with room to spare. At 1 mm thick, it runs cleanly on standard automatic edgebanders and delivers a consistent super matte surface that holds the tone the panel sets.
Key Features
- Factory color match to PRO PET Beige Opaco panels, so face and edge share the same decor without chasing a close third-party substitute.
- Super matte surface at 1 mm thickness absorbs light the same way the panel face does, keeping the look uniform across every visible edge.
- ABS polymer construction is chlorine-free, clearing specifications that exclude PVC and meeting the requirements of green-building projects.
- 23 mm width provides enough overhang on a 19 mm panel to clean up both faces after application with a standard trimmer.
- 246-foot production roll supplies a continuous run without mid-job splicing on larger cabinet packages.
Where Matched Edgebanding Earns Its Keep
On a flat panel door or open shelf, the edge is the first thing a hand touches and one of the first things an eye finds. A close-but-not-matched band shows as a color or sheen shift right at the corner, which undercuts the clean look a super matte face is chosen for in the first place. This banding eliminates that gap. It suits production runs where every face component is already specified in Beige Opaco and the edge needs to follow without a separate color-matching step. It is equally useful on a single-cabinet repair where the edge of a replacement panel needs to hold the existing color through the room.
ABS Material In A Matte-Sensitive Application
ABS banding is dimensionally stable across the temperature range an edgebander runs at, which helps it track the panel edge without curling during application. The chlorine-free formulation is what separates ABS from PVC on a technical specification, and on projects where the spec sheet calls out PVC exclusions, ABS is the answer. The 1 mm wall gives the edge genuine impact resistance without adding a visible step at the joint. The super matte face is consistent across the roll, so the first edge applied and the last one on the job read the same.
Who Reaches For This Roll
Cabinet shops building Beige Opaco PRO PET box and door programs benefit most directly, since the match is built into the part number and there is no sourcing work to do. Millwork operations that run open shelving in a contemporary matte palette will find the neutral warm tone fits a range of interior schemes without forcing the design into a specific wood or solid-color story. Designers specifying for commercial interiors where PVC is restricted can call out the ABS construction alongside the PRO PET panel and know the edge is covered. For smaller shops running one-off jobs, the 246-foot roll is the standard supply unit in this width for the PRO PET program.
Is this banding pre-glued, or does it require a separate adhesive?
This roll is not pre-glued. It is intended for use with an automatic edgebander and a glue pot, or with a hand iron and a separate EVA adhesive. Pre-glued banding is a different product type.
Will the super matte finish on the banding match the PRO PET panel face exactly?
This banding is produced by SALT International to match the PRO PET Beige Opaco decor. As with any factory-matched program, the closest result comes from using the panel and banding from the same collection rather than combining with third-party components.
Why does the category show PVC edgebanding when this product is ABS?
This is ABS edgebanding, which is chlorine-free and distinct from PVC. The two materials serve similar applications but differ on chemistry and on what certain commercial specifications permit. ABS is the material SALT International uses across the PRO PET matching edgebanding program.
Does matching HPL exist for the PRO PET Beige Opaco color?
No. Matching high pressure laminate is not part of the PRO PET program. If the job requires a countertop or a worksurface in the same color, a separate material selection will be needed.
One Roll, Every Edge Covered In Beige Opaco
Matched factory banding removes the guesswork from the edge detail and keeps a super matte Beige Opaco build coherent from face to edge across the entire job.
