Gran Tour Finish High Pressure Laminate for Countertops and High-Wear Surfaces
The Saviola HPL sheet in Rovere Arco brings a structured oak character to surfaces that need more than a panel can deliver. This is a separately manufactured high-pressure laminate sheet, 0.9 mm thick and 73 inches by 120 inches, designed to be bonded down by the fabricator onto countertops, high-wear vertical faces, and post-formed work where a fused panel face would not hold up to the punishment.
Key Features
- Gran Tour finish gives the sheet a defined wood-pore texture that reads as structured oak grain by touch and by sight.
- 73 inch by 120 inch sheet size accommodates full-run countertops and tall vertical panels without a seam.
- 0.9 mm HPL construction is a separately manufactured sheet bonded at the fabrication stage, not a fused panel face.
- Rovere Arco color (GSAF5) coordinates with Saviola TFL decorative panels in the same decor for a consistent face-to-edge-to-top material story.
- Saviola collection matching edgebanding is available in this color, completing the material package for panel-and-top work.
Where This Sheet Fits the Job
HPL is the right call when the surface takes direct wear that a thermally fused panel face is not built for. Countertops, kitchen and bath work surfaces, reception desks, retail shelving, and high-contact vertical panels all benefit from the added durability of a bonded HPL layer. The 73 by 120 inch format is sized for a long countertop run or a continuous wall panel without a break, which matters on open-plan jobs where a seam in the middle of a run is the wrong answer. Post-formed edges, routed profiles, and waterfall tops also call for a sheet-form laminate rather than a panel, and this format handles all three.
Surface, Construction, and the Gran Tour Texture
Gran Tour is a structured texture with a pronounced wood-pore relief that holds up to raking light without going flat. On a Rovere Arco decor that means the oak grain reads dimensionally rather than as a flat print, which is the difference between a surface that works in a lit showroom and one that only looks right in a photograph. At 0.9 mm the sheet is the standard HPL thickness for vertical and countertop bonding work. The sheet is manufactured separately and supplied for the fabricator to bond down with contact cement or a press, which means the final surface performance depends on correct substrate prep and adhesion. For casework interiors and cabinet box sides where a fused panel is the right product, Saviola TFL panels in the same Rovere Arco color are the companion product.
Who Orders This and Why
Cabinet shops building kitchens and baths that carry a single wood-grain story from the door face to the countertop reach for this sheet to close the material gap a panel program leaves open. Commercial millwork fabricators use it for reception counters, retail fixtures, and wall panels in high-traffic spaces where durability is part of the specification. Designers who have specified Saviola TFL on the casework order this sheet to match the countertop and keep the grain consistent across the whole installation. The 73 inch width handles most residential countertop depths and a standard wall-panel height, so a single sheet often covers what a job needs without requiring a separate narrow sheet for trims.
Frequently Asked Questions
Does this sheet come in a 60 inch width as well?
Yes. Saviola HPL is stocked in both 73 inch by 120 inch and 60 inch by 120 inch. If your shop cannot process a 73 inch sheet, the 60 inch format covers the same color and construction.
Is matching edgebanding available in Rovere Arco?
Yes. The Saviola collection includes matching ABS edgebanding for this color, so the panel edge and the HPL surface can share the same decor.
What substrate should this HPL be bonded to?
Particleboard and MDF are both common substrates for HPL countertop and vertical work. The substrate choice affects edge machining and weight — MDF cuts a cleaner profiled edge, particleboard is lighter across a long run.
Can this sheet be post-formed?
Post-forming suitability depends on the specific HPL grade. Confirm with the technical data sheet for this product before specifying a post-formed edge profile.
Is matching HPL available for other SALT collections like SALT 5 or PRO PET?
No. Matching HPL exists for the Saviola collection and for SM'art. SALT 5, PRO PET, Innolac High Gloss, and Nitro Matte do not have matching HPL in the vendor program.
One Material Story, From Panel to Top
Rovere Arco HPL in the Gran Tour finish lets a shop build a kitchen, bath, or commercial counter where the grain runs consistently from the cabinet door to the work surface, with matching banding closing every cut edge in between.
