SCM Class TF 130E Shaper 11HP MK5 Spindle, 3 Phase
This item may incur additional shipping costs and lead times.
Product Details
Essential and professional the manual version. Technological devices in the electronic version that guarantee reduced machine set up times, greater safety and ease-of-use.
Advantages: Maximum Stability and Rigidity: • In all working conditions, thanks to a large spindle moulder column made entirely of cast iron. The shaper spindle is surrounded by a cast iron “cup” to protect the internal mechanical components from shavings and sawdust Set Up Precision and Reliability: • The operator easily adjusts every movement thanks to the handwheel with mechanical readout positioned on the machine front. Maximum Set-Up Speed and Ease-of-Use: • The spindle moulder fence with mechanical programming and digital readouts ensures accuracy to a tenth of a millimetre in positioning the tables so that no more test runs are required to get the desired result
Technical Data: • Max. Useful Spindle Length(mm/inches): 180/7 • Spindle Speed(rpm): 3000/4500/6000/7000/10000 • Max. Diameter of the Profiling Tool(mm/inches): 250/9.8 • Max. Tool Diameter Retractable Under the Table at 90°(mm/inches): 300 / 11.8 • Max. Diameter of the Tenoning Tool(mm/inches): 300/11.8 • Three-Phase Motor(Hp): 11
Specifications
| Box Quantity | 1 |
| Product Type | Spindle Shapers |
| Power | |
| Phase | 3 |
| Length | |
| Width | |
| Height | |
| Horsepower | 11 HP |
| Rangeof Speeds | |
| Electrical Controls | |
| Table Inserts (In.) | |
| Reversible | |
| Spindle Size Under Nut (In.) | |
| Recommended Circuit Size (Amps.) | |
| Table Travel (In.) | |
| Maximum Diameter Cutter Above Table (In.) | |
| Wiring Remarks | |
| Table Opening | |
| Maximum Diameter Cutter Below Table (In.) | |
| Motor Phase | |
| Router Bit Collet Included | |
| Dust Collection Minimum CFM Required (CFM) | |
| Fence Travel (Major and Minor) (In.) | |
| Spindle Stroke | |
| Motor Voltage (V.) | |
| Table Size (In.) | |
| Fence Size (L x H) (In.) | |
| Dust Port Outside Diameter (In.) | |
| Motor Current (Amps) | |
| Maximum Spindle Diameter (In.) | |
| Style (Type) | |
| Spindle Pivot | |
| Spindle Travel (In.) | |
| Digital Readouts | |
| Prewired Voltage (V.) | |
| Table T-Slot (In.) | |
| Spindles Included | |
| Sliding Table Size (In.) | |
| Motor Power | |
| Table Insert Opening Diameter (In.) | |
| Table Height from Floor (In.) | |
| Warranty | |
| Control | |
| Control Panel | |
| Rotational Speeds | |
| Display Resolution | |
| Repeat Accuracy | |
| Extraction Connections | |
| Drive Motor | |
| Range of Speeds |
This item may incur additional shipping costs and lead times.
Product Details
Essential and professional the manual version. Technological devices in the electronic version that guarantee reduced machine set up times, greater safety and ease-of-use.
Advantages: Maximum Stability and Rigidity: • In all working conditions, thanks to a large spindle moulder column made entirely of cast iron. The shaper spindle is surrounded by a cast iron “cup” to protect the internal mechanical components from shavings and sawdust Set Up Precision and Reliability: • The operator easily adjusts every movement thanks to the handwheel with mechanical readout positioned on the machine front. Maximum Set-Up Speed and Ease-of-Use: • The spindle moulder fence with mechanical programming and digital readouts ensures accuracy to a tenth of a millimetre in positioning the tables so that no more test runs are required to get the desired result
Technical Data: • Max. Useful Spindle Length(mm/inches): 180/7 • Spindle Speed(rpm): 3000/4500/6000/7000/10000 • Max. Diameter of the Profiling Tool(mm/inches): 250/9.8 • Max. Tool Diameter Retractable Under the Table at 90°(mm/inches): 300 / 11.8 • Max. Diameter of the Tenoning Tool(mm/inches): 300/11.8 • Three-Phase Motor(Hp): 11
Specifications
| Box Quantity | 1 |
| Product Type | Spindle Shapers |
| Power | |
| Phase | 3 |
| Length | |
| Width | |
| Height | |
| Horsepower | 11 HP |
| Rangeof Speeds | |
| Electrical Controls | |
| Table Inserts (In.) | |
| Reversible | |
| Spindle Size Under Nut (In.) | |
| Recommended Circuit Size (Amps.) | |
| Table Travel (In.) | |
| Maximum Diameter Cutter Above Table (In.) | |
| Wiring Remarks | |
| Table Opening | |
| Maximum Diameter Cutter Below Table (In.) | |
| Motor Phase | |
| Router Bit Collet Included | |
| Dust Collection Minimum CFM Required (CFM) | |
| Fence Travel (Major and Minor) (In.) | |
| Spindle Stroke | |
| Motor Voltage (V.) | |
| Table Size (In.) | |
| Fence Size (L x H) (In.) | |
| Dust Port Outside Diameter (In.) | |
| Motor Current (Amps) | |
| Maximum Spindle Diameter (In.) | |
| Style (Type) | |
| Spindle Pivot | |
| Spindle Travel (In.) | |
| Digital Readouts | |
| Prewired Voltage (V.) | |
| Table T-Slot (In.) | |
| Spindles Included | |
| Sliding Table Size (In.) | |
| Motor Power | |
| Table Insert Opening Diameter (In.) | |
| Table Height from Floor (In.) | |
| Warranty | |
| Control | |
| Control Panel | |
| Rotational Speeds | |
| Display Resolution | |
| Repeat Accuracy | |
| Extraction Connections | |
| Drive Motor | |
| Range of Speeds |