An A/A Panel Built for Casework That Shows From Every Angle
The SALT 5 A/A Decorative Panel in GSAG4 Ancona delivers a thermally fused laminate face on both sides of a 19 mm board, so open shelving, room dividers, and cabinet boxes look intentional from the front and the back. The Chandler finish gives the Ancona decor a tactile surface character that reads well under ambient light, and at 61 inches by 110-1/4 inches the sheet size accommodates full-height vertical components without a seam.
Key Features
- 13-hour water-resistant core — a vendor test result, not a wet-area rating, and useful where spills and humidity are routine.
- 100% post-consumer recycled core — the Gruppo Saviola board program is built entirely from reclaimed wood fiber.
- CARB2 compliant — meets the California formaldehyde emission limits that commercial and residential specifications ask for.
- A/A grade pair means both faces carry the same decorative surface, so either side can show without a second operation.
- GSAG4 Ancona decor in the Chandler finish provides a consistent color and texture across the full sheet.
- 19 mm thickness is the standard cabinet-box dimension, compatible with confirmat fasteners and 23 mm edgebanding on a square edge.
- 61 inch x 110-1/4 inch nominal sheet size yields full-height door and side-panel parts from a single sheet in most residential configurations.
- Thermally fused laminate (TFL) surface bonds the decorative face directly to the board with no separate adhesive layer.
- Matching ABS edgebanding is available in this color to close cut edges and keep the finished component reading as one surface.
Where This Panel Fits the Work
An A/A panel earns its place anywhere the back of the board is as visible as the front. Open bookcase units and entertainment walls show both faces simultaneously, and a floating cabinet with a finished end panel cannot hide a plain backer. Room dividers and freestanding retail fixtures carry the same requirement. The 61 by 110-1/4 inch sheet handles a full-height cabinet side in one piece on most residential floor plans, reducing the seam count and the edgebanding labor that goes with it. The 19 mm thickness also aligns with standard adjustable-shelf hardware, so drilling patterns and shelf pins drop straight in without special tooling.
Surface, Core, and Construction
SALT 5 is a TFL program: the Ancona decor is impregnated into a melamine resin paper and fused directly to the board under heat and pressure, leaving no glue line between the face and the core. The Chandler finish embosses a surface texture into that face that adds tactile depth without the fragility of a high-gloss film. Because the construction is TFL rather than a foil or lacquer, the face holds up to normal shop handling and does not require the protective film management a PET panel does. The core is SALT 5 hardwood particleboard, which machines cleanly on a sliding table saw and holds a confirmat or shelf-pin hole without blowout when feeds and speeds are set for the substrate.
Who Orders This Panel and Why
Cabinet shops running contemporary residential and light commercial work reach for SALT 5 when a client wants a clean, consistent finish at a repeatable price point. The A/A grade pair is the right call for any cabinet that will be inspected from multiple sides during a walkthrough, not just the box interiors a closed door hides. Designers specifying a full room or a built-in wall benefit from the wider sheet width, which keeps horizontal seams off layouts that prioritize unbroken vertical lines. For a contractor sourcing a multi-unit residential project, the consistent Chandler texture across a full color run means panels from different deliveries match at seams without sorting.
What does the A/A grade pair mean on a SALT 5 panel?
Both faces carry the full decorative surface to the same appearance standard. Either face can be the show face, which is what separates an A/A panel from an A/B panel with a backer. There is no weak side.
Is matching edgebanding available for GSAG4 Ancona?
Yes. Matching ABS edgebanding is available for SALT 5 colors including Ancona, so the cut edge reads as the same decor and texture as the face. Confirm the width you need against the 19 mm panel thickness when ordering.
Does SALT 5 have a matching HPL sheet?
No. Matching high-pressure laminate is not part of the SALT 5 program. If a countertop or high-wear horizontal surface needs the same color, plan for a complementary material rather than a matched HPL.
How does the 61 inch width affect a standard cut list?
At 61 inches, the sheet is wider than a nominal 4-foot panel, which gives an extra 13 inches to work with on tall cabinet sides and full-height door blanks. That extra width often means one sheet covers a component that would otherwise require a rip and a glue-up.
Is this panel suitable for cabinet interiors as well as exterior faces?
The A/A construction makes it well suited to both, though shops typically use an A/B panel for interiors where only one face is ever seen. The A/A grade is the right choice when cost efficiency on hidden surfaces is less important than visual consistency on exposed ones.
One Sheet, Both Sides Finished
The SALT 5 A/A panel in Ancona removes the constraint that limits where a decorative panel can land in a design. When the back of the box matters as much as the front, this is the sheet to spec.
