SM'art High Pressure Laminate for Countertops and High-Wear Vertical Surfaces
The SALT SM'art High Pressure Laminate in Torino (SMIT03) is a separately manufactured decorative sheet in the Italia finish, sized at 60 inches by 120 inches and 0.9 mm thick. It is designed to be bonded down by the fabricator onto a substrate of choice, extending the SM'art color program onto surfaces and components that the SM'art panel collection does not cover on its own.
Key Features
- Torino color in the Italia finish family — coordinates directly with SM'art TFL panels in the same decor for a consistent surface across the installation.
- 60 inch by 120 inch sheet size — a single sheet covers countertops, wide vertical runs, and oversized door faces that narrower formats cannot reach.
- 0.9 mm sheet thickness — a post-form and flat-bond weight suited to countertops, high-wear work surfaces, and tight-tolerance vertical applications.
- High pressure laminate construction — kraft paper layers and a decorative surface paper consolidated under high pressure into a hard, dense sheet that resists wear, heat, and impact better than a paper-fused face.
- Italia surface finish — a defined texture family within the SM'art collection, shared across colors in the same group so adjoining surfaces meet without a visible texture break.
- Sold by the sheet — a single unit of measure keeps estimating and ordering straightforward for any run size.
Where This Sheet Fits the Job
HPL earns its place wherever a surface takes sustained contact, heat, or abrasion that a thermally fused face would not survive long-term. A kitchen countertop, a desk surface, a reception transaction ledge, or a post-formed edge are the natural homes for this sheet. Because the Torino color runs through the SM'art TFL panel program as well, a fabricator can carry the same decor from a cabinet box built on SM'art panels onto a countertop or a thick door face covered with this HPL, and the two surfaces read as one design rather than an approximate match. The 60 by 120 inch format covers a full countertop run without a seam on most residential layouts and handles wide commercial casework faces without forcing a joint.
Construction and Surface Character
High pressure laminate is manufactured as its own sheet rather than fused to a board at the factory. The result is a denser, harder surface layer than a paper that has been pressed onto particleboard or MDF, and that density is what gives HPL its resistance to surface wear, moisture, and localized heat. The Italia finish is a texture family the SM'art collection assigns to a group of related colors, which means the emboss is consistent across every color in the family. A joint between two Italia-finish panels or between a panel and this matching sheet will not show a texture mismatch under raking light. At 0.9 mm the sheet is appropriate for flat bonding and for post-forming on a tight radius where a thicker laminate would crack before closing.
Who Orders This Sheet and Why
Cabinet shops that have already specified SM'art panels for a case run reach for this sheet to close out the horizontal surfaces. Countertop fabricators who receive a color spec from a designer working in SM'art use it to deliver a surface that genuinely matches rather than approximates. Commercial millwork firms building reception desks, breakroom counters, or retail fixtures in high-traffic environments choose it because the wear performance of HPL outlasts a TFL face in those conditions. Designers who write a single color across walls, case goods, and work surfaces find the 60 by 120 inch format useful because it scales to the same large components the panel collection covers.
Frequently Asked Questions
Does SM'art HPL come in any other sheet size?
SM'art HPL is 60 inches by 120 inches only. If your shop needs a wider sheet, the Saviola HPL program is stocked in both 60 by 120 and 73 by 120 — confirm the color program fits your spec before substituting.
Is this sheet thick enough for a countertop application?
Yes. At 0.9 mm this is a standard HPL thickness for both flat-bonded and post-formed countertops. The substrate you bond it to determines the finished top thickness and performance, not the laminate itself.
What substrate should I bond this to?
Particleboard and MDF are the standard carrier substrates for HPL countertops and vertical surfaces. Substrate choice depends on the application — MDF gives a cleaner post-formed edge, particleboard costs less across a flat run and holds fasteners well.
Will the Italia finish on this sheet match the Italia finish on SM'art TFL panels?
The Italia finish family is shared across the SM'art HPL and TFL collections for the colors it covers. Two surfaces in the same finish family carry the same emboss, so a joint between the panel face and the laminate sheet reads consistently under light.
Is matching edgebanding available for Torino?
Yes — matching ABS edgebanding is available in the SM'art color program. Reference the SM'art edgebanding listings for Torino to confirm width and roll length for your machine setup.
One Color, Every Surface
The SM'art High Pressure Laminate in Torino lets a single color run from the cabinet box to the countertop without a visual break, so the design holds together wherever the surface changes from panel to work surface.
