Bleached Walnut Phenolic-Backed Veneer For Components Beyond Panel Size
The SALT Pura Vita PVNS13 Noce Sbiancato is a phenolic-backed loose real wood veneer sheet in a bleached walnut finish, sized at 49 inches by 120 inches and 1.3 mm thick. It is supplied unattached to any substrate, ready for the fabricator to bond down onto countertops, curved work, column wraps, or oversized components that a prefinished panel cannot reach.
Key Features
- Real wood face: Genuine walnut veneer with the natural grain, figure, and tonal variation that only actual timber delivers.
- Bleached Walnut finish: A light, cool tone that opens up the natural walnut character without the heavier brown of an unbleached face.
- Phenolic backer: A 0.8 mm phenolic carrier sheet stabilizes the 0.5 mm wood layer and gives the fabricator a flat, consistent glue surface.
- 1.3 mm total thickness: Combines both layers — 0.5 mm wood over 0.8 mm phenolic — thin enough for curved layups and tight radius work.
- 49 inch by 120 inch sheet: A generous format that covers tall doors, full-height panels, and wide horizontal runs in a single piece.
- Pura Vita collection: Part of SALT International's prefinished real wood veneer program, designed to coordinate with matching Pura Vita panels across the same color family.
Where This Sheet Fits the Work
A prefinished veneer panel covers most of a job, but certain components fall outside its reach: a countertop in the same color, a radiused end panel bent over a form, a tall soffit that needs a continuous face without a seam. This is where a loose veneer sheet steps in. Because it arrives as an unattached sheet rather than a factory-pressed panel, the fabricator controls the bonding step and can apply it to any substrate shape the job requires. The 49 by 120 inch format is long enough for full-height closet and cabinet components and wide enough to cover a standard counter depth without a joint.
The sheet also serves as the tying element across a mixed run — when the main casework is built from Pura Vita prefinished panels in Noce Sbiancato and a site-built countertop or a curved reception desk needs the same face, this sheet delivers it in the same bleached walnut finish rather than asking a paint or stain operation to approximate it.
Construction and the Role of the Phenolic Backer
The total 1.3 mm thickness is split between the wood and the carrier: 0.5 mm of real walnut veneer over a 0.8 mm phenolic backer. The backer is what separates this product from raw face veneer — it stabilizes the wood layer so it can be handled flat, resists telegraphing from uneven substrates, and gives glue a consistent surface to bond against. The result is a sheet that behaves more like a thin laminate in handling and application, while the face remains genuine wood with all the grain and color variation that implies. Tone and figure will shift from sheet to sheet; that is the material, not a defect.
Who Orders This Sheet and When
Cabinet shops and millwork houses working in the Pura Vita Noce Sbiancato color reach for this sheet when a component falls outside the prefinished panel format. Designers specifying a continuous bleached walnut interior across panel and non-panel surfaces include it to ensure the finish matches without a secondary paint or stain step. Contractors who encounter a site condition that requires a field-bonded face — a wrapped column, a built-up header, a curved accent wall — use it to carry the same material through. For anyone building or specifying in this color, it is the component that closes the gaps the panel leaves open.
Is this the same face as the Pura Vita prefinished veneer panel in Noce Sbiancato?
Yes. The Pura Vita loose veneer sheet is sourced within the same collection and carries the same Noce Sbiancato bleached walnut finish as the prefinished panel program, so the two surfaces read together without color correction.
What is the difference between this product and the Pura Vita prefinished panel?
The prefinished panel arrives with the veneer already pressed onto a panel core and ready to cut and band. This loose sheet arrives unattached, so the fabricator bonds it to a substrate of their choosing — including curved forms and non-standard panels the factory size does not cover.
Which substrate should I bond this sheet to?
MDF is the most common choice for flat components because it gives the glue line a smooth, consistent surface. For curved work, a flexible substrate or a form-built base is typical. The phenolic backer is compatible with contact cement, urea glue, and standard cold-press adhesives commonly used for veneer work.
Will grain and color match perfectly sheet to sheet?
Natural wood veneer carries inherent variation in tone, grain pattern, and figure from sheet to sheet. Order enough sheets for the full run at once and sort them before cutting to manage any variation across adjacent components.
Is matching edgebanding available for this color?
Matching ABS edgebanding is available within the Pura Vita collection. Confirm the specific color code and width needed when ordering alongside the veneer sheet.
The Right Material for the Gaps in the Layout
A prefinished panel program gets most of the work done. The Pura Vita PVNS13 Noce Sbiancato loose veneer sheet handles the rest — delivering the same bleached walnut real wood face wherever the panel format stops and the job keeps going.
