Wire-Brushed Firenze Oak Grain and the Flexibility to Bond Where Panels Cannot Reach
The SALT Pura Vita PVRF04 Rovere Firenze sheet is a phenolic-backed loose real wood veneer, 49 inches by 120 inches and 1.3 mm thick, finished in a Natural Firenze Oak Soft Brushed texture. It is supplied unattached to a panel so fabricators can bond it to curved components, countertops, and shaped parts that a rigid decorative panel cannot cover — keeping the same natural oak grain running through every surface in a project.
Key Features
- Real wood face: The decorative surface is genuine Firenze oak veneer, not a printed film, so grain, tone, and texture are natural and vary sheet to sheet.
- Soft brushed finish: A light brushing treatment lifts the soft grain to add tactile depth without opening the pore fully, producing a surface that reads as crafted rather than flat.
- Phenolic backer: The 1.3 mm sheet combines a 0.5 mm wood veneer layer over a 0.8 mm phenolic carrier, giving the sheet the dimensional stability to lay flat and bond cleanly.
- Large-format sheet: At 49 inches by 120 inches, the sheet covers oversized components and long faces with fewer seams.
- A-Grade front, B-Grade back: The Pura Vita grade pair designates the show face to a tighter appearance standard while the reverse is held to a looser grade — the same real wood, different selection criteria.
- Part of the Pura Vita matching program: This veneer coordinates with the Pura Vita decorative panel collection, carrying the same decor onto surfaces the panel size does not reach.
Where Rovere Firenze Veneer Earns Its Place
Rigid decorative panels cover flat casework efficiently, but a project rarely stays entirely flat. Curved cabinet ends, post-formed countertop returns, column wraps, and shaped reception-desk faces all require a surface that bends to the form rather than forcing the form to accommodate the sheet. Phenolic-backed loose veneer is the answer in those situations — the fabricator bonds it down using the same color that runs through the rest of the job, so the finished piece reads as a continuous material.
Rovere Firenze is a warm, medium-toned oak with a tight, even grain character produced by the soft brushing treatment. It suits contemporary residential interiors, hospitality millwork, and commercial casework where the warmth of real wood is part of the specification rather than an approximation of it. Because grain and tone shift naturally between sheets, specify this veneer where that variation is an asset — open shelving, feature walls, and exposed cabinet ends benefit from the depth that only a natural material produces.
Construction: Real Wood Over a Phenolic Carrier
The total sheet thickness of 1.3 mm breaks down as 0.5 mm of real Firenze oak over a 0.8 mm phenolic backer. The backer is the component that separates this from an unbacked face veneer: it resists telegraphing through from an uneven substrate, holds the sheet flat during handling and storage, and gives an adhesive a stable, consistent surface to grip. The soft brushed treatment on the face is applied to the wood layer, so the texture is in the wood itself, not a pressed emboss on a film.
Natural color and grain variation are inherent to the material. Sheet-to-sheet movement in tone and figure is not a defect — it is the property that makes the surface read as real wood rather than a reproduction. For runs where close color consistency is critical, order the full quantity from a single lot.
Right for Fabricators Who Need the Full Picture in One Material
This sheet is for the fabricator who has already committed to the Pura Vita oak program and needs to carry it beyond flat panels. It requires bonding equipment and technique — edge bander iron-on application is not the intended use. Shops running curved components, post-forming work, or architectural millwork that must match a panel specification will find this sheet the direct companion to the Pura Vita panel line. Designers specifying a natural wood interior finish across complex geometry will find it covers what a rigid sheet cannot.
What is the difference between this sheet and the Pura Vita decorative panel in the same color?
The decorative panel is a finished board with the veneer already pressed to a rigid core, sold ready to cut and install. This sheet is the veneer supplied loose — unattached to a panel — so the fabricator bonds it to a substrate of their own choosing. Use the panel where a flat rigid component is needed and this sheet where a shaped or curved component must carry the same surface.
Which face should face outward?
Orient the A-grade face outward. The vendor grades the front face to the tighter appearance standard; the back is real wood but held to a looser grade and is not intended as the show surface.
How thick is the actual wood layer on this sheet?
The wood layer is 0.5 mm. The remaining 0.8 mm is the phenolic backer. The total sheet handles at 1.3 mm, but the wood you see and feel is thinner than the sheet you pick up.
Will grain and color match exactly between sheets?
No. Real wood veneer carries natural variation in tone and grain figure from sheet to sheet. That variation is part of the material. For projects where close consistency across a run is important, order the full quantity at once so all sheets come from the same production lot.
Is this sheet suitable for exterior applications?
No. This is an interior product. Real wood veneer over a phenolic backer is engineered for dry indoor environments. It is not rated for exterior exposure or sustained moisture contact.
The Right Surface for Work That Goes Beyond the Flat
When the design calls for Firenze oak on every surface — curved, shaped, or flat — this sheet is the component that closes the gap the panel cannot cover, delivering a real wood result in one consistent material across the whole project.
