10-Foot Phenolic-Backed Loose Real Wood Veneer For Curved Work and Component Matching
The Pura Vita PVRV02 Rovere Verona is a phenolic-backed loose real wood veneer sheet sized at 49 inches by 120 inches, designed for fabricators who need real wood coverage on components, curved forms, or surfaces that a prefinished panel program cannot reach. At 1.3 mm total thickness — 0.5 mm of genuine grey oak over a 0.8 mm phenolic backer — this sheet bonds down with the same workflow as any backed veneer and finishes to the same face as the Pura Vita panel program.
Key Features
- Real wood face: 0.5 mm natural grey oak, so grain, tone, and texture are genuinely wood, not a printed or filmed substitute.
- Soft brushed finish: Light surface brushing lifts the grain slightly for tactile depth without opening the pore fully.
- Phenolic backer: The 0.8 mm phenolic carrier provides dimensional stability and a consistent gluing surface across the full sheet.
- 49 inch by 120 inch sheet: The longer dimension covers tall cabinet runs and full-height door faces with fewer seams.
- A-Grade front with B-Grade back: The show face is held to the tighter appearance standard; the reverse is real wood to a looser grade.
- Part of the Pura Vita program: Color and texture coordinate with Pura Vita prefinished veneer panels for consistent grain and tone across a project.
Where This Sheet Fits the Job
A prefinished panel covers the flat carcass efficiently, but not every surface in a project is flat or panel-sized. Column wraps, radiused end panels, reception desk curves, and oversized countertop faces all call for a sheet the fabricator bonds and finishes in the shop. The 49-by-120-inch format is long enough to run a full-height closet side or a tall door face in a single piece, reducing visible seams in finished work. The soft brushed grey oak reads as a contemporary linear grain — a look that pairs cleanly with painted bases, metal accents, and dark stone countertops in residential and commercial interiors alike.
Construction and Surface Detail
The total 1.3 mm thickness divides into 0.5 mm of real oak and 0.8 mm of phenolic carrier. The phenolic backer keeps the sheet flat during storage and handling, resists the moisture that an unbalanced veneer can absorb unevenly, and gives an edgebander or vacuum press a reliable substrate to grip. The grey oak face carries a soft brushed treatment — early wood is lifted just enough to feel under the hand and catch raking light along the grain, while the surface stays smooth enough for a clean finish coat. Because the face is genuine wood, color and figure vary naturally from sheet to sheet; that variation is the material, not a defect.
Who Orders This Sheet and Why
Architectural millwork shops order it to carry the Pura Vita grey oak tone onto curved panels and site-built components that ship as prefinished panels. Cabinet shops use it when a project specifies a consistent wood appearance across flat and shaped faces and the prefinished panel alone cannot cover the geometry. Designers working on commercial interiors specify it alongside Pura Vita panels so wall cladding, column wraps, and casework all read from the same color and grain family. The sheet also suits small-shop custom work where a single run of tall doors or a feature wall needs real wood without the complexity of site-finishing raw veneer.
Frequently Asked Questions
Is this the same wood face as the Pura Vita prefinished panel?
Yes. PVRV02 Rovere Verona is the Pura Vita grey oak decor, so the loose veneer sheet and the prefinished panel draw from the same color and grain program. Matching them across flat and curved surfaces in one project is exactly the application this sheet is designed for.
What does the A-Grade front with B-Grade back mean on this sheet?
Both faces are real grey oak wood, but graded differently. The A-grade face is selected to the tighter appearance standard — tighter color consistency, fewer natural character marks. The B-grade back is the same species held to a looser standard. Orient the A-grade face outward on any surface that will be seen.
Can this sheet be used for curved work?
The phenolic backer makes it suitable for moderate curves when formed over a substrate with appropriate radius. It is not a purpose-built kerfed or flexible panel, so very tight radii will require shop trials. For flat panels and gentle curves it performs as a standard backed veneer.
How is the 1.3 mm thickness divided?
The sheet is 0.5 mm of real oak veneer over a 0.8 mm phenolic backer. The 1.3 mm total is the dimension to work from for seam planning and edge treatment, but the visible wood layer is 0.5 mm.
Is matching edgebanding available for this color?
Matching ABS edgebanding is available in the Pura Vita program. Confirm the specific width and roll length needed for your panel thickness when ordering.
Real Wood Coverage Where the Panel Program Ends
The Pura Vita PVRV02 Rovere Verona loose veneer sheet puts genuine grey oak on the surfaces a prefinished panel cannot reach — curves, oversize faces, and custom components — so a complete project reads as one material from every angle.
