7.5HP Easy Lock Miter with Positive Grip Feeder
This item may incur additional shipping costs and lead times.
Product Details
Our Model LM125 is Uniquely Designed to Produce an extremely Precise and Easy Lock Miter Joint. Many customers use our machines for face-frame cabinetry, beams, pillar/column wrapping, box newel posts, solid surface, and more. Features: • A and B profiles are cut using a Single Pneumatic Powered Tilting Spindle • No more downtime setting up and changing out your shaper • No more running pieces on their side • Upgrade to our Easy Lock Miter LM125
Specifications
| Box Quantity | 1 |
| Product Type | Shaper |
| Power | 230/460V |
| Phase | 3 |
| Length | 42" |
| Width | 54" |
| Height | 60" |
| Horsepower | 7.5 HP |
| Rangeof Speeds | 7,400 RPM |
| Electrical Controls | |
| Table Inserts (In.) | |
| Reversible | |
| Spindle Size Under Nut (In.) | |
| Recommended Circuit Size (Amps.) | 30/50 |
| Table Travel (In.) | |
| Maximum Diameter Cutter Above Table (In.) | |
| Wiring Remarks | |
| Table Opening | |
| Maximum Diameter Cutter Below Table (In.) | |
| Motor Phase | 3 |
| Router Bit Collet Included | |
| Dust Collection Minimum CFM Required (CFM) | 670 |
| Fence Travel (Major and Minor) (In.) | |
| Spindle Stroke | |
| Motor Voltage (V.) | 230/460 |
| Table Size (In.) | 40 x 47 |
| Fence Size (L x H) (In.) | |
| Dust Port Outside Diameter (In.) | 4 |
| Motor Current (Amps) | 30/50 |
| Maximum Spindle Diameter (In.) | 1/1/2004 |
| Style (Type) | Shaper |
| Spindle Pivot | |
| Spindle Travel (In.) | |
| Digital Readouts | |
| Prewired Voltage (V.) | 230/460 |
| Table T-Slot (In.) | |
| Spindles Included | |
| Sliding Table Size (In.) | |
| Motor Power | 3 |
| Table Insert Opening Diameter (In.) | |
| Table Height from Floor (In.) | |
| Warranty | |
| Control | |
| Control Panel | |
| Rotational Speeds | |
| Display Resolution | |
| Repeat Accuracy | |
| Extraction Connections | |
| Drive Motor | |
| Range of Speeds |
This item may incur additional shipping costs and lead times.
Product Details
Our Model LM125 is Uniquely Designed to Produce an extremely Precise and Easy Lock Miter Joint. Many customers use our machines for face-frame cabinetry, beams, pillar/column wrapping, box newel posts, solid surface, and more. Features: • A and B profiles are cut using a Single Pneumatic Powered Tilting Spindle • No more downtime setting up and changing out your shaper • No more running pieces on their side • Upgrade to our Easy Lock Miter LM125
Specifications
| Box Quantity | 1 |
| Product Type | Shaper |
| Power | 230/460V |
| Phase | 3 |
| Length | 42" |
| Width | 54" |
| Height | 60" |
| Horsepower | 7.5 HP |
| Rangeof Speeds | 7,400 RPM |
| Electrical Controls | |
| Table Inserts (In.) | |
| Reversible | |
| Spindle Size Under Nut (In.) | |
| Recommended Circuit Size (Amps.) | 30/50 |
| Table Travel (In.) | |
| Maximum Diameter Cutter Above Table (In.) | |
| Wiring Remarks | |
| Table Opening | |
| Maximum Diameter Cutter Below Table (In.) | |
| Motor Phase | 3 |
| Router Bit Collet Included | |
| Dust Collection Minimum CFM Required (CFM) | 670 |
| Fence Travel (Major and Minor) (In.) | |
| Spindle Stroke | |
| Motor Voltage (V.) | 230/460 |
| Table Size (In.) | 40 x 47 |
| Fence Size (L x H) (In.) | |
| Dust Port Outside Diameter (In.) | 4 |
| Motor Current (Amps) | 30/50 |
| Maximum Spindle Diameter (In.) | 1/1/2004 |
| Style (Type) | Shaper |
| Spindle Pivot | |
| Spindle Travel (In.) | |
| Digital Readouts | |
| Prewired Voltage (V.) | 230/460 |
| Table T-Slot (In.) | |
| Spindles Included | |
| Sliding Table Size (In.) | |
| Motor Power | 3 |
| Table Insert Opening Diameter (In.) | |
| Table Height from Floor (In.) | |
| Warranty | |
| Control | |
| Control Panel | |
| Rotational Speeds | |
| Display Resolution | |
| Repeat Accuracy | |
| Extraction Connections | |
| Drive Motor | |
| Range of Speeds |